Electronics Forum: siplace (Page 36 of 39)

Siemens Siplace 80S15 causing Line Controller to hang up, and 80S15 keeps waiting for machine data from Line controller

Electronics Forum | Wed Mar 18 18:22:32 EDT 2020 | sportsradar

I have replaced both cards on the machine and the card in the PC. I have also replaced the cable. I can see where the machine is sending the request for data (by the screen shoots above). And I can see the PC is seeing something from the machine by

Mydata vs Siplace

Electronics Forum | Fri Apr 26 08:38:14 EDT 2002 | ian

We have had Mydata for eight years and Siplace for six. We have found that the Siemens is much more accurate and faster than the Mydata (about four times quicker). Although the Mydata is more friendly regarding the software, if the upfront preparator

Re: Need info. on vib times for Siplace 80f4 Users

Electronics Forum | Mon Sep 14 21:40:25 EDT 1998 | Stefan W.

Unfortunatly there are too many variables to play with that you can't make a general rule for the vibration time. However, I suggest you increase the vibration time and lower the vibration force ( AC voltage ). For an SO 8, I would use 600 ms for an

Re: Need info. on vib times for Siplace 80f4 Users

Electronics Forum | Tue Sep 15 14:12:36 EDT 1998 | Justin Medernach

Unfortunatly there are too many variables to play with that you can't make a general rule for the vibration time. However, I suggest you increase the vibration time and lower the vibration force ( AC voltage ). For an SO 8, I would use 600 ms for

Re: Placement Machine CPk Kit

Electronics Forum | Wed Sep 09 12:39:22 EDT 1998 | Chrys

I am attempting to locate a kit to be used on surface mount equipment to determine the placement capability (CPk). Does anyone have information on where to purchase such a kit? Ideally this kit should be usable on placement equipment from various

Re: Siemens: Slow Line Computer

Electronics Forum | Mon Aug 31 10:10:08 EDT 1998 | Ray N Lopez Mata

We are having a lot of problems with the Line Computer Speed on our Siemens Siplace Line. This seems to be a common problem when many different jobs, partnumbers, and package forms are stored on the line computer. Please let me know i

Re: Pick Place Change-overs, strengths, ages

Electronics Forum | Thu Sep 16 21:28:44 EDT 1999 | JAX

I have a number of hopefully easy questions: 1. Are there significant differences in the ease of change-overs and set-up among different equipment manufacturers? For example, are Siemens Siplace machines truly more modular than others?

Re: SPC on Chip Placement Machines

Electronics Forum | Sun Sep 12 05:59:32 EDT 1999 | JAX

Hi All, Does any one out there have SPC control on Chip placement Machines? I was wondering what type of parameters we can monitor. We have Siplace here equip with SEC-GEM and a monitoring software. Just curious if anyone has done SPC on Chip

Re: Siemens: Slow Line Computer

Electronics Forum | Mon Aug 31 10:16:52 EDT 1998 | Ray N. Lopez Mata

We are having a lot of problems with the Line Computer Speed on our Siemens Siplace Line. This seems to be a common problem when many different jobs, partnumbers, and package forms are stored on the line computer. Please let me know if you a

Thoughts on Universal GSM1/2 Anyone??

Electronics Forum | Wed Apr 29 07:46:52 EDT 1998 | Scott Davies

We would like to add another pick and place machine to the SMT line. We're low volume so we change the line over after each group of boards. So far we've pretty much ruled out Siplace in favor of the Universal machines. Does anyone care to share the


siplace searches for Companies, Equipment, Machines, Suppliers & Information