Electronics Forum | Wed Nov 21 12:29:52 EST 2001 | mparker
Now that we know where you've been and what you wish to accomplish next, I can still give you some suggestions. 1. Get IPC-7912. Use it to evaluate your CM's. Especially if you have multiple contractors supplying like products. You will quickly see
Electronics Forum | Thu Sep 19 11:14:45 EDT 2002 | Jim M.
We had lots of problems with bridging on 15.8mm pitch, QFP17-160 at the start.The board was .032 thick, double sided-six boards to a panel. Here is the problems (not neccessarily in the biggest to little but as i remember them) and solutions that he
Electronics Forum | Sat Oct 19 08:33:50 EDT 2002 | johnw
The whole thread seem's to have gone off track. Russ we've been doing a fairly big bit of work on the whole BGA voidign thing as we were so unhappy with the answer's that we were getting from around the industry, basically no one really kows all the
Electronics Forum | Thu Jan 02 11:35:30 EST 2003 | Richard
Cleanliness test � �Area Grid Arrays�. Evaluation of residues� resistivity in a specific location on the board. (As compared to �Solvent Extract� evaluation.) We are: SMT assembly, using standard �water soluble� process with micro BGAs (example: C
Electronics Forum | Mon Aug 02 09:26:15 EDT 2004 | davef
Q1: How do you define torque setting for screw? A1: Talk to people at your nut supplier. Some nut suppliers post torque tables on the web. For instance: http://www.thelenchannel.com/1torque.html http://www.marfas.com/Ttorque.shtml http://www.pac
Electronics Forum | Mon Sep 06 10:21:10 EDT 2004 | pioneertechnology
Hi All We have been manufacturing lead free in the UK for about two years now in a fashion. Let me expalin. Two years ago we began to change over our wave solder machines to lead free process. We read all the articles and attended the seminars on
Electronics Forum | Tue Mar 13 09:29:44 EDT 2007 | realchunks
Hi Long, Cmiller is right, check out the vendors and ask for lots of info, they'll flood you with it. You also mite ask to see their equipment working in a facility near you. Also check out IPC-A-610 and J-STD-001. Get to know the different termi
Electronics Forum | Tue Dec 04 08:34:07 EST 2007 | davef
We no advice to give you on the topic, but maybe while you're waiting for others to reply, reading a trade journal article on the topic might help. Below is a link to "Pin-in-hole reflow (PIHR) and lead-free solder joints" by David Bernard, Bob Willi
Electronics Forum | Thu Jan 05 12:28:12 EST 2017 | rgduval
I'd recommend not using them, personally :) The long term reliability of the SMT joint is suspect, IMHO. I had them for an in-house manufactured bed-of-nails test fixture for testing somewhere north of 5000 units....after the first 100, we were rep
Electronics Forum | Wed Mar 01 16:52:43 EST 2000 | Dave F
Hey Hany: Here yago: On power outages: Talk about fun!!!! Can we have more of �em?? � You�re correct that a UPS to run your reflow is very expensive, but all you have to run is the belt motor. That�s "cheap!!!!" Get UPS sizing information from
