Electronics Forum | Tue Apr 11 15:23:43 EDT 2006 | Cal
Hi Shawn- If I can remeber....from my Siemens Days on the S15 or F Series Once you send the program over to the machine from the line computer...You can not skip. Remember, these machines in theory are not ment to stop running (i.e. Thus the feeder s
Electronics Forum | Thu Apr 13 12:58:49 EDT 2006 | caldon
Hi Brian- All is well on my end. I have not been to SMTNET in a long while but pop in from time to time. Working here at Agilent gives me more of an opportunity to check in. How are things on your end? Where are you working these days? Cal
Electronics Forum | Tue Apr 11 11:40:41 EDT 2006 | global
We have a Siemens S15 and an F3, which we have only had now for about 4 months. We have an old line of HS180s and an SP120 and have found that the S15 and F3 do not have the option to skip a part if one runs out during placement. We from time to time
Electronics Forum | Tue Apr 11 15:37:31 EDT 2006 | stockley
(Hey Cal how you doing?) I can't resist this. You can sort of do what you're hoping for but you have to be very careful. Let the component run out and let the machine get as far as it's going to go. Then go to "Software Options", "Test commands" then
Electronics Forum | Sat May 24 04:45:20 EDT 2014 | mpolak
Check if that component is not skipped in component data.
Electronics Forum | Wed Apr 28 01:43:25 EDT 2004 | wolf1
Does anyone know how to skip a component while in full auto mode on the HSP?
Electronics Forum | Tue Mar 01 10:43:59 EST 2005 | Rob
Hi Greg, Is anyone logging the errors at QC/touch up stage so they can feed them straight back to SMT and fix them? (i.e. skipped components, poor paste coverage etc) Obviously the faster you spot an error the cheaper it will be for you. Cheers,
Electronics Forum | Fri Aug 24 12:59:03 EDT 2018 | cupet
Dear davef, but this LED is skip component, that's a blank footprint and one of its pad is badly wetted...this is the reason for my thinking about contamination. Do you mean different solder paste with more aggressive flux?
Electronics Forum | Fri Nov 24 22:32:12 EST 2017 | myke03o
Some Customers normally don't share CAD data in order not to copy the design. What you can do is use the Pick and Place file then plot to the pcb paste/silkscreen layer of the gerber using software. Not sure if your universal machine can load a gerb
Electronics Forum | Fri Jan 05 18:39:49 EST 2024 | madisreivik
Also, sometimes placing heads "skip" some rotation - component is little skewed on board but vision shows "correct" numbers. Probably some mechanical error ?
