Electronics Forum | Wed Apr 24 06:19:56 EDT 2019 | kayvee
I don't profess to be an expert, just I remember a few things when a ran the CP40 some years ago. Also check the PC, I remember mine had some intermittent connection issues between the cards in the ISA slots, and re-seating them sometimes helped.
Electronics Forum | Tue Jan 28 15:27:57 EST 2020 | jede
Let me rephrase my question. How do you avoid having errors in your SMT set up? IE xxx part goes in feeder slot 55. We currently have our quality department do a machine check but small errors like this can still go unnoticed.
Electronics Forum | Thu Jun 25 11:30:18 EDT 2020 | kylehunter
I'd love to see a thread focused on various methodologies used for general inventory management schemes, but primarily on procedures to ensure the proper parts get loaded on the pick and place. We have an Assembleon pick and place, so there is no fe
Electronics Forum | Tue May 25 12:24:17 EDT 2021 | bukas
is Mark3 program started on startup or do you start it manually? It can be like this if you run it manually. Other cause is bad contact in PCB slot or connector in 90% cases. Wash then with contact cleaner and insert and pull out few times to clean c
Electronics Forum | Mon Apr 18 19:58:22 EDT 2022 | cbeneat
I had the same question. We have custom nozzles made by Count on Tools. I believe we found urethane works the best for the silicon domed LEDs. Have you slowed the feed rate down on the feeder? Also adjust the top tape to the back slot on the feeder.
Electronics Forum | Wed May 25 12:09:52 EDT 2022 | stevemiles
Hi, I've had this problem with two DEK Horizon 03i printers. The first time it was the camera (firewire) causing the PC to freeze. The second time it was the firewire card in the PC that was the problem. Try moving the camera firewire cable to a d
Electronics Forum | Tue Dec 13 07:13:28 EST 2022 | bukas
same happens with older series. clean connectors again, also clean slots. once(out of 100 times) i had this problem on my CP45 and it turned out to be corrupted data on HDD. so good luck, dont think out of box, think out of room.
Electronics Forum | Mon Aug 21 16:36:14 EDT 2023 | merliniass
Hi friend, so I can give you good advice on this. To ensure a balanced and enjoyable experience, it is imperative to set a budget for your gaming activities and adhere to it. While online slots may be an entertaining pastime, https://cityslots.org/bo
Electronics Forum | Fri Feb 16 14:06:49 EST 2024 | redspare1
You will need an old version of acronis. I think 2014 uses 512mb ram. Just move the machine drive to a newer computer that has an IDE slot. IDE can also do CF with an adapter. You're basically running an PC with nothing in it, just booting acronis,
Electronics Forum | Fri Jul 16 11:14:42 EDT 1999 | M Cox
| Hello, | i'm looking for informations about companies which are using system to verify the loadind of a SMT machine by using barcode (on the slot on the machine & on the reel). | I'm in charge of the installation of this kind of system. | I expect