Electronics Forum: small and parts and tips (Page 1 of 12)

Pick and place machine for small productions. Any suggestions?

Electronics Forum | Thu Sep 19 11:11:21 EDT 2013 | northstarmfg

I would be looking at used or refurbished equipment with that budget. We had a similar budget a few years back and ended up purchasing a rebuilt pick & place machine. We have been extremely happy with the results Don't forget that you will need t

Pick and place machine for small productions. Any suggestions?

Electronics Forum | Thu Sep 19 12:29:57 EDT 2013 | deanm

What is your plan/budget for your reflow oven and paste printer? Those are equally important as a placement machine. Have you factored in other costs of in-house assembly such as inspection, moisture sensitive device storage, rework tools, cleaning p

Pick and place machine for small productions. Any suggestions?

Electronics Forum | Sat Dec 14 00:17:17 EST 2013 | mmdashti

Dear Juan; Our company is pishrokhotoot and we are in SMT business during 25 years ago. About machines which you mentioned: 1- Termway (Beijing Torch) is piece of shit ,Please remove this brand from your mind. 2- Neotech has some difficulty in ope

Pick and place machine for small productions. Any suggestions?

Electronics Forum | Sun Sep 29 09:48:01 EDT 2013 | jvadillo

Hi, we have finally purchased the following second hand equipment: - TWS Quadra pick&place from 2004 - TWS 1100 oven - Motoprint-M automatic screen printer We are quite happy for the price we paid and what we have obtained. The PnP needs some n

Pick and place machine for small productions. Any suggestions?

Electronics Forum | Wed Sep 18 19:38:33 EDT 2013 | jvadillo

Hi all! after hours of manual hand soldering and after spending thousands of euros subcontracting PCB assembly, we have decided to buy a fully automated pick&place machine. Our main assembly requirements are 0805/0603 for passives and TQFP-64

Which (cheap / old) pick and place for 0402, 0.5mm FPC small line

Electronics Forum | Fri Feb 18 13:55:12 EST 2022 | cbart

One thing to think about is keeping the machine running! the biggest thing I would be looking at or into is availability of spare parts and tech support. Call the equipment manufactures and see if they are still supporting the machines, both with tec

Which (cheap / old) pick and place for 0402, 0.5mm FPC small line

Electronics Forum | Fri Feb 18 20:37:14 EST 2022 | dwl

0402 imperial? all those machines should be able to handle that. Even an old Quad 4C can place those. As others have said, availability of parts in your area will be the issue.

Which (cheap / old) pick and place for 0402, 0.5mm FPC small line

Electronics Forum | Sun Feb 20 10:54:14 EST 2022 | compit

Opal XII, MG-1 (and substitites from Yamaha available in Asia). Unlimited spare parts, cheap feeders, etc. MG-1 is faster, better for service (opinion of a friendly serviceman)

Which (cheap / old) pick and place for 0402, 0.5mm FPC small line

Electronics Forum | Sat Feb 26 18:37:21 EST 2022 | oxygensmd

I am using SiPlace S20 and F4 machines. Both of them handle 0402 without problem. A newer machine, like S23 or S25HM is way better and accurate, S27HM can place smaller parts too. We are using EKRA E5 (2000) which can print this size without issues.

SOD323 and SC90 bounceing parts in final PNP stages.

Electronics Forum | Mon Mar 05 17:54:07 EST 2012 | swag

Three ideas for you: 1) Make sure nozzle tips are clean. 2) Check coplanarity of leads to bottom of body. If leads are above body, it could be the are not contacting paste well. 3) Investigate static charge in the parts caused by the feeder or

  1 2 3 4 5 6 7 8 9 10 Next

small and parts and tips searches for Companies, Equipment, Machines, Suppliers & Information