Search Results

smd capacitor socket

SMTnet search results for "smd capacitor socket"


  • SMTnet
  • »
  • smd capacitor socket

There were no results for smd capacitor socket in any of the components on SMTnet. Suggestions:

  • Make sure all words are spelled correctly.
  • Try different keywords.
  • Try more general keywords.
  • Try fewer keywords.

SMTnet SEARCH INCLUSION Results. Include your website too! »

Microsoft Word - Library Expert Through-hole Families.docx

http://www.pcblibraries.com/Products/FPX/UserGuide/download/Library%20Expert%20Through-hole%20Families.pdf

. https://www.linkedin.com/company/3196824 Get updates at www.PCBLibraries.com/downloads http://www.PCBLibraries.com/forum updated 6-14-16     Non‐polarized Axial Diameter Leaded Component   Resistor (RESAD)    Capacitor Non‐polarized (CAPAD)    Fuse Axial  Diameter (FUSAD)    Inductor Axial Diameter (INDAD)    Non‐polarized Axial Diameter Land Pattern  Zero Rotation         Polarized Axial Diameter Leaded Component   Capacitor Polarized Axial Diameter (CAPPAD)    Diode Axial Diameter (DIOAD)    Capacitor . https://www.linkedin.com/company/3196824 Get updates at www.PCBLibraries.com/downloads http://www.PCBLibraries.com/forum updated 6-14-16       Non‐polarized Radial Rectangular Leaded Component   Capacitor, Radial Dipped Diameter    Capacitor, Radial  Dipped Diameter   Land Pattern Zero Rotation     Capacitor, Radial Disk Button  w/Offset Leads     Capacitor, Radial Dipped with  Offset Leads    Capacitors, with Offset Leads  Land Pattern Zero Rotation    Capacitor, Radial Dipped Rectangle    Capacitor  Radial Disk Button    Capacitor, Radial Metallized Polypropylene    Fuse, Radial Dipped Rectangle    Radial Capacitor and Fuse   Land Pattern Zero Rotation      Library Expert Through‐hole Families    https://twitter.com/pcblibraries © 2014-2019 PCB Libraries, Inc

Microsoft Word - Library Expert Through-hole Families.docx

https://www.pcblibraries.com/Products/FPX/UserGuide/download/Library%20Expert%20Through-hole%20Families.pdf

. https://www.linkedin.com/company/3196824 Get updates at www.PCBLibraries.com/downloads http://www.PCBLibraries.com/forum updated 6-14-16     Non‐polarized Axial Diameter Leaded Component   Resistor (RESAD)    Capacitor Non‐polarized (CAPAD)    Fuse Axial  Diameter (FUSAD)    Inductor Axial Diameter (INDAD)    Non‐polarized Axial Diameter Land Pattern  Zero Rotation         Polarized Axial Diameter Leaded Component   Capacitor Polarized Axial Diameter (CAPPAD)    Diode Axial Diameter (DIOAD)    Capacitor . https://www.linkedin.com/company/3196824 Get updates at www.PCBLibraries.com/downloads http://www.PCBLibraries.com/forum updated 6-14-16       Non‐polarized Radial Rectangular Leaded Component   Capacitor, Radial Dipped Diameter    Capacitor, Radial  Dipped Diameter   Land Pattern Zero Rotation     Capacitor, Radial Disk Button  w/Offset Leads     Capacitor, Radial Dipped with  Offset Leads    Capacitors, with Offset Leads  Land Pattern Zero Rotation    Capacitor, Radial Dipped Rectangle    Capacitor  Radial Disk Button    Capacitor, Radial Metallized Polypropylene    Fuse, Radial Dipped Rectangle    Radial Capacitor and Fuse   Land Pattern Zero Rotation      Library Expert Through‐hole Families    https://twitter.com/pcblibraries © 2014-2019 PCB Libraries, Inc

ZK Electronic Technology Co.,LTD.Trade, repair and maintenance of JUKI-YAMAHA and Panasonic SMT

http://www.smt-cn.com/products_detail/productId=4423.html

) J6010801050 M3x20MM SCREW J6001302036 SOCKET HEAD CAP SCREW M3x12 (SUS) J6001301250 SOCKET HEAD CAP SCREW M3x10 (SUS) J6001301050 LED PCB D SMD ASSY LED PCB D (SMD TYPE ) J6010801050 M3x20MM SCREW J6001302036 SOCKET HEAD CAP SCREW M3x12 (SUS) J6001301250 SOCKET HEAD CAP SCREW M3x10 (SUS) J6001301050 LED PCB D SMD ASSY LED PCB D (SMD TYPE ) TU0604B J6713030A AIR TUBE air tube (POLYURETHANE) TU0805B J6713027A AIR TUBE air pipe UB1065B J6713013A AIR TUBE air pipe UB1065B J6713013A BALL SPLINE Spline Ball Spline UNIT Z-AXIS J6611008A HEX SUPPORT M3x6 J6103028A SOCKET SET SCREW M8x10 (SUS ) J4109030A LED PCB C SMD ASSY LED PCB C(SMD TYPE) J4109028A P-Z34 COMMAND CABLE ASSY MK-VM10-Q J9075977A VACUUM SENSOR Vacuum Sensor BOARD ASSY VACUUM BOARD J9060080A COMPLIANCE ASSY J9055020A COMPLANCE ASSY J9055001A PUSHER pusher J7255006A CE TRAY COVER (ESD ) TU0604B J6713030A AIR TUBE air tube (POLYURETHANE) TU0805B J6713027A AIR TUBE air pipe UB1065B J6713013A AIR TUBE air pipe UB1065B J6713013A BALL SPLINE Spline Ball Spline UNIT Z-AXIS J6611008A HEX SUPPORT M3x6 J6103028A SOCKET SET SCREW M8x10 (SUS

ZK Electronic Technology Co.,LTD.Trade, repair and maintenance of JUKI-YAMAHA and Panasonic SMT

http://www.smt-cn.com/products_detail/productId=4422.html

) J6010801050 M3x20MM SCREW J6001302036 SOCKET HEAD CAP SCREW M3x12 (SUS) J6001301250 SOCKET HEAD CAP SCREW M3x10 (SUS) J6001301050 LED PCB D SMD ASSY LED PCB D (SMD TYPE ) J6010801050 M3x20MM SCREW J6001302036 SOCKET HEAD CAP SCREW M3x12 (SUS) J6001301250 SOCKET HEAD CAP SCREW M3x10 (SUS) J6001301050 LED PCB D SMD ASSY LED PCB D (SMD TYPE ) TU0805B J6713027A AIR TUBE air pipe UB1065B J6713013A AIR TUBE air pipe UB1065B J6713013A BALL SPLINE Spline Ball Spline UNIT Z-AXIS J6611008A HEX SUPPORT M3x6 J6103028A SOCKET SET SCREW M8x10 (SUS ) J4109030A LED PCB C SMD ASSY LED PCB C(SMD TYPE) J4109028A P-Z34 COMMAND CABLE ASSY MK-VM10-Q J9075977A VACUUM SENSOR Vacuum Sensor BOARD ASSY VACUUM BOARD J9060080A COMPLIANCE ASSY J9055020A COMPLANCE ASSY J9055001A PUSHER pusher J7255006A CE TRAY COVER (ESD ) TU0604B J6713030A AIR TUBE air tube (POLYURETHANE) TU0805B J6713027A AIR TUBE air pipe UB1065B J6713013A AIR TUBE air pipe UB1065B J6713013A BALL SPLINE Spline Ball Spline UNIT Z-AXIS J6611008A HEX SUPPORT M3x6 J6103028A SOCKET SET SCREW M8x10 (SUS

N641F08W1545 Panasonic 8mm Belts A I Spares For RHS2B Machine Durable

http://www.smtspare-parts.com/sale-11131580-n641f08w1545-panasonic-8mm-belts-a-i-spares-for-rhs2b-machine-durable.html

. SOCKET BUTTON HEAD BOL N310EESX672A SENSOR N510017321AA HEX. SOCKET HEAD CAP BOLT N510018494AA ROUND PLAIN WASHER N510017428AA HEX. SOCKET HEAD CAP BOLT N510018481AA ROUND PLAIN WASHER N510017333AA HEX . SOCKET HEAD CAP BOLT N510017435AA HEX. SOCKET HEAD CAP BOLT N510017395AA HEX. SOCKET HEAD CAP BOLT N510017313AA HEX. SOCKET HEAD CAP BOLT N510017305AA HEX . SOCKET HEAD CAP BOLT N510017433AA HEX. SOCKET HEAD CAP BOLT N510017386AA HEX. SOCKET HEAD CAP BOLT N510018499AA ROUND PLAIN WASHER N510018327AA X02G52101 BLOCK 1 005 X02G52105 PLATE 1 008 N210047291AA PULLEY 8 028 N210058870AA BRACKET 1 029 X01L52041 RETAINER 1 030 ) KXF020RAA00 BEARING N9866734 SPRING N510038143AA POST N510018131AA FLUSH HEAD SCREW N510017399AA HEX. SOCKET HEAD CAP BOLT N510018494AA ROUND PLAIN WASHER N510017333AA HEX . SOCKET HEAD CAP BOLT N510017433AA HEX. SOCKET HEAD CAP BOLT N510017376AA HEX. SOCKET HEAD CAP BOLT N510018479AA ROUND PLAIN WASHER N510017849AA HEXAGON NUT N510017867AA HEXAGON NUT N510018501AA ROUND PLAIN WASHER N510017344AA HEX

Surface Mount Placement Machine on sales of page 2 - Quality Surface Mount Placement Machine supplie

http://www.smtspare-parts.com/supplier-144644p2-surface-mount-placement-machine

... Read More 2017-03-29 10:16:04 Electric Surface Mount Placement Machine , Capacitor SMT Lead Cutting Machine Contact Now Electric Surface Mount Placement Machine , Capacitor SMT Lead Cutting Machine​ Description: Part Name ... Read More 2017-03-29 10:16:04 Accurate Surface Mount Placement Machine , Digital SMD Component Counter Contact Now Accurate Surface Mount Placement Machine , Digital SMD Component Counter Description: Part Name

DOUBLE LOCK O2 GLASS FILTER

http://www.hellerindustries.com/search.php?zoom_query=DOUBLE+LOCK+O2+GLASS+FILTER&zoom_page=3&zoom_per_page=10&zoom_and=0&zoom_sort=1

to replace with old BBU unit 8123 Eaton ... with replace old BBU unit 8129 Capacitor, 3 uF, 450VAC, 85C 8130 Capacitor bracket 8131 Heat sink compound- TYPE 44NON-SILICONE- 1LB 8132 Cooling Fan, 400CFM, for PN 7630 8134 Rapidox Filter Element- Pack of 10 & Equipment Spare Parts Full List of Heller Reflow Ovens& Equipment Spare Parts 5259 Heller Reflow Oven Parts Results 750- 800: 5250 Heater Wire 10AG-Fiber Glass - FT 5258 Circuit Breaker 2-Pole 3 Amp 5258K CIRCUIT BKR 2-POLE 3AMP 5264K IR PANEL HEATER 14" WIDE 5265K RFI LINE FILTER 10AMP 81F4558A 5267 Socket PIN 5279 Hose Reducer, 4" to 3 & Equipment Spare Parts 49 Buy your Heller reflow oven spare parts from the manufacturer. ... ,N2,7 "BW,FANSEAL- Use PN 594081-01 447868-02 EMS MTR ASSY,N2,7 "BW,FANSEAL- Use PN 594081-02 447877 4uF Capacitor for SPG AC motor 447921 DY O2 ANALYZER,O /L ,W /DISP, LOW PPM, W/PUMP 448505-02 6000W HEATER ASSY A-1734mm 447578 SOLID STATE RELAY, "S4T-16P-20 447579 SSR SOCKET ... URL: http://www.hellerindustries.com/browse.php?st=2400 << Previous 1 2 3 4 5 6 7 Next >> Common To All Heller Reflow Ovens Pure forced convection heating Advanced Windows operating system

DOUBLE LOCK O2 GLASS FILTER

http://www.hellerindustries.com/search.php?zoom_query=DOUBLE+LOCK+O2+GLASS+FILTER&zoom_page=1&zoom_per_page=10&zoom_and=0&zoom_sort=2

to replace with old BBU unit 8123 Eaton ... with replace old BBU unit 8129 Capacitor, 3 uF, 450VAC, 85C 8130 Capacitor bracket 8131 Heat sink compound- TYPE 44NON-SILICONE- 1LB 8132 Cooling Fan, 400CFM, for PN 7630 8134 Rapidox Filter Element- Pack of 10 & Equipment Spare Parts 49 Buy your Heller reflow oven spare parts from the manufacturer. ... ,N2,7 "BW,FANSEAL- Use PN 594081-01 447868-02 EMS MTR ASSY,N2,7 "BW,FANSEAL- Use PN 594081-02 447877 4uF Capacitor for SPG AC motor 447921 DY O2 ANALYZER,O /L ,W /DISP, LOW PPM, W/PUMP 448505-02 6000W HEATER ASSY A-1734mm 447578 SOLID STATE RELAY, "S4T-16P-20 447579 SSR SOCKET ... URL: http://www.hellerindustries.com/browse.php?st=2400 1 2 3 4 5 6 7 Next

http://www.finntestelectronics.com/wp-content/uploads/2016/02/FINN_USB_DAQ_Manual.pdf

(0.100” sockets). The sockets are designed to fit the probes of a Vertical Smart FINN TM (P/N: TCxxSF-V). Each socket is colored coded: the black socket is ground, the red socket is power (+5.0V), and the clear socket is the input signal. Figure 16 shows DAQ socket. Please contact FINN Test Electronics for more information on this adaptor. Figure 16 http://www.finntestelectronics.com/ Rev D -012516 9 The 3 probes on the Smart FINN TM (or adapter) should be aligned with the sockets on connector of the 1 Channel FINN ® USB DAQ.  The red probe (5.0V) should be aligned with the red socket (5.0V) on the FINN® USB DAQ.  The black probe (ground) should be aligned with the black socket (ground) on the FINN® USB DAQ.  The clear probe (Output Signal) should be aligned with the clear socket (input signal) on the FINN ® USB DAQ. Figure 17 shows a Smart FINN TM (Vertical Configuration – P/N: TCSFxx-V) connected to the FINN ® USB DAQ as described above. Instructions for software installation can be found in section 3 .  Incorrectly connecting the power and ground pins may cause damage to the Smart FINNTM/Ultra FINNTM and the FINN® USB DAQ.  Do not apply voltage larger than 5.0V or lower than 0.0V on the input socket of the FINN® USB DAQ as it may damage the USB device. Figure

http://www.finntestelectronics.com/wp-content/uploads/2016/02/SmartFINN_Manual.pdf

...................................................................................................................................... 7 8.6. Temperature .................................................................................................................................. 7 8.7. Socket Set Height ......................................................................................................................... 8 9. Fixture Considerations ........................................................................................................... 8 9.4. Socket Set Height ......................................................................................................................... 9 10. Absolute Maximum Ratings to temperature in this range is less than 0.3 percent. Rev D - 012516 8 8.7. Socket Set Height When multiple Smart FINNs are used in the same fixture or duplicate fixtures, then socket set height of each Smart FINN must be the identical. If the socket set heights the brightness is not diminished. If the end is not polished enough, then some light will reflect off the jagged surface rather than enter the conduit and brightness will be reduced. 9.4. Socket Set Height All of the sockets set height must be identical in a fixture. If the socket set height varies from location to location then the voltage (intensity) reading will also vary for each location. 10. Absolute Maximum Ratings Over operating free-air temperature range (unless otherwise noted)† Supply voltage, VDD

CableEye Automation-Ready Cable & Harness Testers | Catalog

https://www.camiresearch.com/catalog.html?Catalog_Pages/CB11_20/CB13.html

: 152 Test points expandable to over 1024 test points by adding expansion modules (Item 813, see below); Active Test Point switch settable to 64, 128, and 152 test points to obtain optimal measurement time, special MiniHook and probe socket, footswitch and remote control socket (Items 823 or 823H, 128-points per module). Additional features (compared to the M2U) include a remote control socket to be used for either an optional external footswitch (Item 714 ) or for a custom remote control to extend panel indicators, and an accessory socket for a probe or minihook connectors (Item 710). A probe comes with this tester and works with our software to identify unterminated wires capacitors in the range of 100 pF to 100 µF,including polarized capacitors, with an accuracy of 5%. Measure multiple capacitors or capacitor matrices in one test cycle at the rate of approximately 20 capacitors per second (rate dependent on capacitance value features include a remote control socket, to be used for either an optional external footswitch (Item 714) or for a custom remote control to extend panel indicators, and an accessory socket for a probe or minihook connectors. A probe comes with this tester

CableEye Automation-Ready Cable & Harness Testers | Catalog

https://www.camiresearch.com/catalog.html?/Catalog_Pages/Services/calibration_kit.html

: 152 Test points expandable to over 1024 test points by adding expansion modules (Item 813, see below); Active Test Point switch settable to 64, 128, and 152 test points to obtain optimal measurement time, special MiniHook and probe socket, footswitch and remote control socket (Items 823 or 823H, 128-points per module). Additional features (compared to the M2U) include a remote control socket to be used for either an optional external footswitch (Item 714 ) or for a custom remote control to extend panel indicators, and an accessory socket for a probe or minihook connectors (Item 710). A probe comes with this tester and works with our software to identify unterminated wires capacitors in the range of 100 pF to 100 µF,including polarized capacitors, with an accuracy of 5%. Measure multiple capacitors or capacitor matrices in one test cycle at the rate of approximately 20 capacitors per second (rate dependent on capacitance value features include a remote control socket, to be used for either an optional external footswitch (Item 714) or for a custom remote control to extend panel indicators, and an accessory socket for a probe or minihook connectors. A probe comes with this tester

LGA and QFN Rework

https://www.okinternational.com/metcal/english/globalnavigation/applications/convection/lga-and-qfn-rework

 >  Applications  >  Convection  >  LGA and QFN Rework Application Hand Soldering Convection Double sided rework PoP Rework Lead Free Array Rework Pad Clean-up LGA and QFN Rework APR Series Applications Flux Dip Process Micro SMD and profiling Fume Extraction     .4mm Pitch LGA Reworking Fine Pitch LGA-LLP Packages Reworking LGA and QFN   Reworking QFN _LGA _MLF    LGA2011 Intel socket removal with tweezer nozzle APR 5000 XLS   Videos player place holder LGA2011 Intel socket removal with tweezer nozzle APR 5000 XLS   Metcal is a brand of       © 2018 Metcal. All rights reserved

LGA and QFN Rework

http://www.okinternational.com/metcal/english/globalnavigation/applications/convection/lga-and-qfn-rework

 >  Applications  >  Convection  >  LGA and QFN Rework Application Hand Soldering Convection Double sided rework PoP Rework Lead Free Array Rework Pad Clean-up LGA and QFN Rework APR Series Applications Flux Dip Process Micro SMD and profiling Fume Extraction     .4mm Pitch LGA Reworking Fine Pitch LGA-LLP Packages Reworking LGA and QFN   Reworking QFN _LGA _MLF    LGA2011 Intel socket removal with tweezer nozzle APR 5000 XLS   Videos player place holder LGA2011 Intel socket removal with tweezer nozzle APR 5000 XLS   Metcal is a brand of       © 2018 Metcal. All rights reserved

Unisoft - ATE PCB TEST for EMS, CEM, OEM, ODM electronics manufacturer - PCB assembly / PCBA

http://www.unisoft-cim.com/TEST-FIXTURE_download.htm

. So in our set up above we indicated using a "0" that we wish not to place test probes on "SMD" components and also using a "0" in "Bot -4.800 Y 0.320 Top Smd 149 - GND C1.2 X -4.800 Y 0.180 Top Smd 54 - VCC C10.1 X -5.125 Y 0.720 Bottom Smd 149 - GND C10.2 X -5.125 Y 0.580 Bottom Smd Step 5 — Programming the Flying Probe ATE This step creates the necessary file to program your Flying file, will list all the capacitor reference designators that are being tested via CPAR and it looks like the following in that file. Ref.Des. Side P/N Status C26 Bot C26151LF Tested in a CPAR C27 Bot C26151LF Tested in a CPAR COMMENTS ABOUT THE .TST 5.250 J1 1 X 0.700 Y 5.425 148 - 0104 GENERIC OUTPUT .FBA has every component pin and via. Can be used to setup various test equipment: 54 - VCC C1.1 X -4.800 Y 0.320 Top Smd 149 - GND C1.2 X -4.800 Y 0.180 Top Smd 54 - VCC C10.1 X -5.125 Y 0.720 Bottom Smd 149 - GND C10.2 X -5.125 Y 0.580 Bottom Smd Step 6 — More Features In this section we will review a few additional features of the software: Show how to add test probe numbers to the free Unisoft PC Board CAD Viewer & Gerber Viewer software

Unisoft - CAD viewer, Gerber viewer, PCB viewer software for EMS, CEM, OEM, ODM electronics manufact

http://www.unisoft-cim.com/features.htm

Files Wizard COMPONENT PROPERTIES - Changing SMD to THD and vice versa COMPONENT PROPERTIES - Changing TOP to Bottom and vice versa DISPLAY - Labels Plus Toggle menu DISPLAY - Units displayed . Click cross-check the Bill of Materials (BOM) to find out more. Back to top COMPONENT PROPERTIES — Changing SMD to THD & vice versa It is possible to change a component type from SMD to THD or vice versa on the PC board the .FBA File Component Type Indicator CHANGING A COMPONENT TYPE FROM SMD to THD & VICE VERSA IN THE .FBA FILE: In certain cases it may be quicker to export a .FBA file and edit the component type indicator in that file and then reimport the .FBA. An example of when it may be faster to do it using this method would be if on a PCB assembly / PCBA you wanted all the components changed from THD to SMD . Then in this case you can simply change all the THD markers in the .FBA file to SMD markers with a search/replace and then reimport the edited

PCB Glossary | Super PCB

http://www.superpcb.com/pcb-glossary/

) A SMD package in which solder ball interconnects cover the bottom surface of the package.  Bare Board An unassembled (unpopulated) printed board.  Base Copper The thin copper foil portion of a copper-clad laminate for PCBs .  Component Any of the basic parts used in building electronic equipment, such as a resister, capacitor, DIP or connector, etc.  Component Hole A hole that is used for the attachment and/or electrical connection of component terminations, including pins and wires, to a printed board , capacitor, transistor, etc.  Electroplating The electro deposition of an adherent metal coating on a conductive object. The object to be plated is placed in an electrolyte and connected to one terminal of a D.C. voltage source. The metal to be deposited ) is a type of chip module, which utilizes inward extending J-shaped pins to attach chips to a printed circuit board surface.  SMD Surface Mount Device.  SMOBC –(Solder Mask Over Bare Copper) A method of fabricating a printed circuit board that results in final

Alpha 1 Technologies | Parts & Accessories

http://alpha1technologies.com/parts-accs/

Panel 0 16340001 Valve 5 16343000 Socket,Power 4 16409000 Roller 2 16428000 Bracket 5 16474000 Spring,Torsion 1 16630001 Switch, Cherry 4 16689000 Spring,Extention 3 16697000 Plate,Mounting 1 16742001 Tube 7 16757001 Bearing,Ball 5 16757002 Bearing,Ball 6 Pulley 3 16886000 Clevis 1 16889000 Actuator 8 16895000 Cyclinder,Air 57 17070000 Connector, Plug 1 17147000 Capacitor 1 17149000 Tortion Spring 1 17190000 Cam 2 17191000 Shaft 16 17239000 Clip 3 17258078 Insulation, .50 1 17273000 Pulse Valve 7 17274000 Jack Socket Unit 18 30157600 Bumper 2 30160200 Bearing 2 30179700 Index Wheel .375 5 30179900 Inner Guide 12 30180000 Inner Guide RH 1 30200001 Label 1 30200901 Housing BEC 1 30218700 Block 1 30230501 Stop Pin 4 30237401 Bushing 2 30238001 Shim 1 42786301 Jack Socket, Kit 30 42804702X Carrier Clip Assy. 27 42804703X Carrier Clip Assy. 16 42804704X Carrier Clip 0 42838002 Nut, Adj. 1 42841002 Bracket,Cyl 2 42841101 Bracket, Cyl 5 42851005 Fitting, Straight 0 42851007 Fitting, Straight 0 42854402 Bracket, Switch 0 44854201 Bracket, Motor Adjust 0 44854401 Actuator, Clamp 0 44854501 Bumper 0 44854502 Bumper 4 44860501 Jack Socket 6 44860502 Jack Socket- .125 200 44860503 Jack Socket- .045 x .250 0 44874702 Bracket, Actuator 0 44874901 Block, Idler 0

Parts | Used SMT and Through Hole PCB Assembly Equipment

http://alpha1technologies.com/parts/

Torque Limiter (Used) 0 15894002 Roller 0 15897000 Support 1 15898000 Post 0 15899000 Shaft 0 15973000 Key 2 15982000 Guide 0 15988000 Shaft Pressure Arm 2 16086003 Machining, Y Motor 0 16143000 Panel 0 16340001 Valve 0 16343000 Socket,Power 0 16409000 Cyclinder,Air 0 17070000 Connector, Plug 1 17147000 Capacitor 1 17149000 Tortion Spring 1 17190000 Cam 2 17191000 Shaft 16 17239000 Clip 3 17258078 Insulation, .50 0 17273000 Pulse Valve 6 17274000 Actuator, Pilot 3 17277000 Clevis 0 17293000 Pulley 1 30109000 Power Supply 4 30109100 Circuit Breaker 1 30132700 Push Button Switch 1 30138600 Comm Intc Cable Asm 4 30150700 Jack Socket Unit 18 30157600 Bumper 2 30160200 Bearing 2 30179700 Index Wheel .375 5 30179900 Inner Guide 12 30180000 Inner Guide RH 0 42718602 Clamp 1 42722503 Plate 0 42740602 Fitting, Male Elbow 8 42740613 Fitting, Male Elbow 0 42740624 Fitting, Male Elbow 1 42757801 Actuator 2 42766201 Connector, Male 4 42786301 Jack Socket, Kit 0 42804702X Carrier Clip Assy. 535 42804703 Carrier clips , Switch 0 44852001 Clamp, Encoder 0 44853501 Bracket, Switch 0 44854201 Bracket, Motor Adjust 0 44854401 Actuator, Clamp 0 44854501 Bumper 0 44854502 Bumper 4 44860501 Jack Socket 6 44860502 Jack Socket- .125 200 44860503 Jack Socket- .045 x .250 0 44874702

http://versatecsolutions.com/pdfs/brochure_cs400e.pdf

Lines, which are saved to an executable file. PAGE 26 DIP SIP SOCKET RESISTOR RADIAL WIDTH WIDTH # LEGS # LEGS # LEGS COLORS COLORS RESISTOR AXIAL DIODE CAPACITOR misc. TYPE TYPE TRANSISTOR SIZE SIZE SIZE TYPE COLORS COLORS COLORS SIZE EDIT MODE ° min Clinch Angle Lead lengths are consistent from board to board, because the the board hight is not dependent on operator “feel”. Transistor Multi-Leaded Components 10-pin SIP 40-pin DIP socket Radial Resistor The board sits on the standooff pin

Microsoft PowerPoint - Mfg Rel Challenges with QFN - ASQ RS [Read-Only]

http://www.solder.net/images/pdf/product/2011-03_ASQ-QFN.pdf

High Voltage Power Supplies (Hi-Pot) Testing o HALT o Temperature Cycling o Thermal Shock o Temperature/Humidity o Vibration o Mechanical Shock / Drop Tower o Mixed Flowing Gas o Salt Spray o Capacitor Testing (Ripple Current bonds to both tops and sides of pads o Use solder mask defined pads (SMD) with care o Can be used to avoid bridging between pads, especially between thermal and signal pads. o Pads can grow in size quite a bit based on PCB mfg capabilities o Can lose

Microsoft PowerPoint - Mfg Rel Challenges with QFN - ASQ RS [Read-Only]

https://www.solder.net/images/pdf/product/2011-03_ASQ-QFN.pdf

High Voltage Power Supplies (Hi-Pot) Testing o HALT o Temperature Cycling o Thermal Shock o Temperature/Humidity o Vibration o Mechanical Shock / Drop Tower o Mixed Flowing Gas o Salt Spray o Capacitor Testing (Ripple Current bonds to both tops and sides of pads o Use solder mask defined pads (SMD) with care o Can be used to avoid bridging between pads, especially between thermal and signal pads. o Pads can grow in size quite a bit based on PCB mfg capabilities o Can lose

http://www.gpd-global.com/co_website/pdf/doc/NCM5000-Pump-Parts-List-22200614.xlsx

NOT BUILD 0 0 0 0 0 00/0091 TABLETOP,DS9100,GENERIC,DO NOT BUILD 0 0 0 0 0 00/98 CAPACITOR,ELECTROLYTIC_1200MF @75V SCREW 10 0 0 0 10 000/0004 BELT,TIMING,POLY_5MMP 6MMW 225MML 4.95 0 0 0 27.74 4.95 000/0019 BELT,TIMING,POLY_5MMP 6MMW 225MML 4.95 0 0 0 59.22 ,TRIMMER_1K,25T,CERMET 0 0 0 0 0 10/0106 CAPACITOR,TANTALUM_10 MF 35 VDC 1.13 0 0 0 5.46 1.13 10/0107 HEAT UNIT,RING_A-407,240V 77 0 0 0 188.7 77 10/0108 HEAT UNIT,RING_A-802, 240V 105 0 0 0 260.1 105 10/0109 CLAMP,RING HEATER_#6018 6.79 0 0 0 16.85 6.79 10 /0112 CAPACITOR,CERAMIC_100 PF 100V RADIAL 0.6 0 0 0 3.255 0.6 10/0115 SCREW,NYLON,FINGER_1/4-20 X 3\4 LONG 0.0828 0 0 0 1.64 0.0828 10/0118 TOOL STEEL,A2,F/G_3/32 X 5/8 0.833333 0 0 0 0.833333 10/0119 TOOL STEEL,A2,F/G_5/16 X 3/4 0.86 0 0 0 0.86 10/0123

http://www.gpd-global.com/co_website/pdf/doc/PCD-Pump-Parts-List-22200613.xlsx

,DS9000,GENERIC,DO NOT BUILD 0 0 0 0 0 00/0091 TABLETOP,DS9100,GENERIC,DO NOT BUILD 0 0 0 0 0 00/98 CAPACITOR,ELECTROLYTIC_1200MF @75V SCREW 10 0 0 0 10 000/0004 BELT,TIMING,POLY_5MMP 6MMW 225MML 4.95 0 0 0 27.74 4.95 000/0019 BELT,TIMING,POLY_5MMP 6MMW % 0.24 0 0 0 0.24 10/0104 RESISTOR_360 OHM,2W,5% 0 0 0 0 0 10/0105 POTENTIOMETER,TRIMMER_1K,25T,CERMET 0 0 0 0 0 10/0106 CAPACITOR,TANTALUM_10 MF 35 VDC 1.13 0 0 0 5.46 1.13 10/0107 HEAT UNIT,RING_A-407,240V 77 0 0 0 188.7 77 10/0108 HEAT UNIT,RING_A-802 , 240V 105 0 0 0 260.1 105 10/0109 CLAMP,RING HEATER_#6018 6.79 0 0 0 16.85 6.79 10/0112 CAPACITOR,CERAMIC_100 PF 100V RADIAL 0.6 0 0 0 3.255 0.6 10/0115 SCREW,NYLON,FINGER_1/4-20 X 3\4 LONG 0.0828 0 0 0 1.64 0.0828 10/0118 TOOL STEEL,A2,F/G_3/32 X 5/8

J.M.W. - ADMIN Inventory Listing

http://www.jmw-inc.com/Listing.asp?FindThis=

Interlock Switch SMT Spare Parts N/A CH12UL Oriental Motor Capacitor SMT Spare Parts N/A CH20UL Oriental Motor Capacitor SMT Spare Parts N/A CH23UL Oriental Motor Capacitor SMT Spare Parts N/A CH45UL Oriental Motor Capacitor SMT Spare Parts N/A CH25 Oriental Motor Capacitor SMT Spare Parts N/A CH60CFAUL Oriental Motor Capacitor SMT Spare Parts N/A CH70UL Oriental Motor Capacitor SMT Spare Parts N/A 700-HK-36Z24 Allen Bradley Relay SMT Spare Parts N/A G2R-1-SN Omron Relay SMT Spare Parts N/A G2R-1-T Omron Spare Parts N/A CHB-38-70012 Potter & Brumfield Timing Relay SMT Spare Parts N/A AES1135 Schmersal Relay SMT Spare Parts N/A BC9-30-10 ABB Contactor SMT Spare Parts N/A P2RF-05-E Omron Relay Socket SMT Spare Parts N/A SH2B-05 Idec Relay Socket SMT Spare Parts N/A SY2S-05 Idec Relay Socket SMT Spare Parts N/A SH3B-05C Idec Relay Socket SMT Spare Parts N/A SY4S-05 Idec Relay Socket SMT Spare Parts N/A 27E893 P&B Relay Socket SMT Spare Parts N/A SH1B-05C Idec Relay Socket SMT Spare Parts N/A 95.75 Finder Relay Socket SMT Spare Parts N/A 700-HN100 Allen Bradley Relay Socket SMT Spare Parts N/A 11PFA Omron Relay Socket SMT Spare Parts N/A VBC6-30-10 ABB Relay SMT Spare Parts N/A SC648 Sonalert Audible Alarm SMT Spare Parts N/A BRP4535S-24-CD Intervox

SMT Spare Parts - Electrovert, DEK, MPM

http://www.jmw-inc.com/SMT_Spare_Parts.asp

Parts N/A MKP4-500 Hydra MKP4-500 Capacitor SMT Spare Parts N/A 42SRP-6002-QD Allen Bradley 42SRP-6002-QD Sensor SMT Spare Parts N/A 1492-SP3C300 Allen Bradley 1492-SP3C300 Circuit Breaker SMT Spare Parts N/A MKP2-500 Hydra MKP2-500 Capacitor SMT Spare Parts N/A Magnifyinglight3 Daylight N/A Magnifying Lamp SMT Spare Parts N/A JC0971 Unknown JC0971 7" LCD Monitor SMT Spare Parts N/A 46800605 SMT Spare Parts N/A 44507-0100 Omron STI Magnetically Actuated Safety Interlock Switch SMT Spare Parts N/A FRS9 Rockwell Automation Magnetically Actuated Safety Interlock Switch SMT Spare Parts N/A CH12UL Oriental Motor Capacitor SMT Spare Parts N /A CH20UL Oriental Motor Capacitor SMT Spare Parts N/A CH23UL Oriental Motor Capacitor SMT Spare Parts N/A CH45UL Oriental Motor Capacitor SMT Spare Parts N/A CH25 Oriental Motor Capacitor SMT Spare Parts N/A CH60CFAUL Oriental Motor Capacitor SMT Spare Parts N/A CH70UL Oriental Motor Capacitor SMT Spare Parts N/A 700-HK-36Z24 Allen Bradley Relay SMT Spare Parts N/A G2R-1-SN Omron Relay SMT Spare Parts N/A G2R-1-T Omron Relay SMT Spare Parts N/A RH1B-U Idec Relay SMT Spare Parts N/A RH4B-U Idec Relay SMT

http://islandsmt.com/wp-content/uploads/2017/06/CS-400E-service-manual.pdf

. They are accessed by opening the left side door on the Controller cabinet. The fuse marked "A" is a 3A 250V fuse (Part Number: 312003) between the -26V capacitor, and the Crydom Relay Board. The fuse marked "8" is a 3A 250V fuse between the +26V capacitor fuse between the +40V capacitor and the Crydom Relay Board. The voltage from this fuse supplies the CuVClinch's Up/Down motor. The fuse marked "D" is a 64250Vfuse (Part Number: 312006) between the l2Vtransformer and the Crydom Relay Board. The voltage . DRIVER MODULES Located on the rear door of the Controller cabinet are six Driver Modules. Each of them is pou,tered by a 35V capacitor. The Driver Modules control the motion of the Table (X and Y directions), The Movable Projector (X and Y directions " (the average setting)' Press "ESC" twice' Z. press ,,J,,, then ,,C,,. This will allow you to jog the CuVClinch. Deflect the Jogstick up or down to jog the Movable Cutter to one side' g. Remove the #g socket head screw (A) attaching the stand-off Pin bracket to the cutter assembly. Remove the stand-otf pin by iotating it b0' counterclockwise and dropping it down through the cutter. 4. Remove the two #4 socket head screws (B) securing the cutter to the Cam Arm. Slide the cutter (both Inner and Outer Cutters) out

C:\400E Manual\Programming\COVER.wpd

http://islandsmt.com/wp-content/uploads/2017/06/CS-400E-Programming-Manual.pdf

the w ritten perm ission of V ersatec, llc is prohibited. PAGE 26 DIP SIP SOCKET RESISTOR RADIAL WIDTH WIDTH # LEGS # LEGS # LEGS COLORS COLORS WRITES IMAGE TO SEQUENCE. RETURNS TO PROGRAM SCREEN. CLEARS IMAGE DATA. RETURNS TO MAIN IMAGE SCREEN. REDO LAST IMAGES ALT AI@ RESISTOR AXIAL DIODE CAPACITOR misc. TYPE TYPE TRANSISTOR SIZE SIZE SIZE TYPE COLORS COLORS COLORS SIZE WRITES IMAGE TO SEQUENCE. RETURNS TO PROGRAM SCREEN. CLEARS IMAGE DATA. RETURNS TO MAIN IMAGE SCREEN. REDO LAST STEP SEE RESISTOR PAGES ) (.3 or .4 or .6) (body & notch) SIP 4 11 # LEGS/10 0.000 COLORS (5-19) (body & polarity) DIP SOCKET 4 12 # LEGS/10 BODY WIDTH COLORS (4-40) (.3 or .4 or .6) (black & gray) RADIAL RES. 4 13 SMALL BODY 0.000 COLORS (1 only) (bands) AXIAL RES. 4 15 BODY VERIFIER AUTOMATIC RESISTOR TEST 1 12 COMPONENT VERIFIER AUTOMATIC INDUCTOR TEST 1 13 COMPONENT VERIFIER AUTOMATIC CAPACITOR TEST 1 14 COMPONENT VERIFIER AUTOMATIC DIODE TEST 1 20 COMPONENT VERIFIER TEST ENABLED 1 21 COMPONENT VERIFIER MANUAL RESISTOR TEST 1 22 COMPONENT VERIFIER MANUAL INDUCTOR TEST 1 23 COMPONENT VERIFIER MANUAL CAPACITOR TEST 1 24 COMPONENT VERIFIER MANUAL DIODE TEST 2 00 ROTARY BIN RESET 2 01 ROTARY BIN ADVANCE 2 02 ROTARY BIN BACKUP 2 03 ROTARY BIN RANDOM ACCESS (CS-241) 2 71 CS-740

Microsoft Word - J001E redline.doc

http://ipc.org/4.0_Knowledge/4.1_Standards/J-STD-001E-redline-April-2010.pdf

element on the solder destination side lands (e.g., PTH component) of the assembly. b. The visible portion, if any, of the connection on either side of the PTH solder connection (or the visible portion of the SMD connection) is acceptable. c. Process

http://ipc.org/files-history/HistoryBook_web.pdf

, capacitors and transistors on the surface of the same piece of semiconductor. In a few weeks he assembled a circuit on a small bar of germanium that included a transistor, a capacitor and three resistors. The circuit worked, and the integrated circuit

Select Coat In-Line Oven

http://www.nordson.com/en-us/divisions/asymtek/documents/Manuals/108183c.pdf

the four socket head screws (1) securing the two end-of-stroke lightshields (2) to the support shafts (3). CAUTION: Be careful not to pinch your fingers when turning the gear box pulley by hand. 6. See Figure 4-3. Turn the gear box pulley (3) by hand until the UV lamps reach one end of the stroke. 7. See Figure 4-4. Position the lightshield (2) approximately 1.3 cm (1/2 in.) away from the UV lamp trolley. 8. Tighten the two lightshield socket head screws (1). 9. Repeat the above procedure to adjust capacitor to discharge any residual energy. If the primary capacitor fails, a backup capacitor will dissipate energy in five minutes. To avoid a five-minute delay if you think the primary capacitor may have failed, ground the capacitor terminals

Imagine your company on top of search results!
  • SMTnet
  • »
  • smd capacitor socket
Fast PCB Assembly

Led tester