Electronics Forum: smd line optimazing (Page 1 of 12)

Skills operators smd assembly

Electronics Forum | Tue Jul 18 11:32:40 EDT 2006 | Joris Groot koerkamp

I am wondering what skills operators need to run an smd line itself. At our company they know how the pick&place machine works (refill/ changover), but if there is a problem with wrong placed components they don't known what to do. Our managmenttea

Skills operators smd assembly

Electronics Forum | Tue Jul 18 16:40:09 EDT 2006 | dphilbrick

We have a system where when we set up the line to run a job before the first part is placed an auditor verifies we have all the correct parts loaded on the machines in thier correct locations. We then run a first article. The board is inspected to in

smd marking code

Electronics Forum | Sat Nov 04 06:15:05 EST 2006 | James.li

I would like to know if it exist a croos reference book for marking code on smt device? I'm fixing a unit now and try to know what are the following devices: The look like mosfet and are mark like that "A2sKG",there are a horizontal line on top of "s

Skills operators smd assembly

Electronics Forum | Tue Jul 18 15:47:07 EDT 2006 | Mark

IPC610 training to help verify issues that might arise. Also, the opeators need to know part numbers and descriptions because that should be common knowledge when running a SMT line. Plus, with your comment "At our company they know how the pick&plac

Skills operators smd assembly

Electronics Forum | Tue Jul 18 19:09:12 EDT 2006 | SWAG

Our lines have operators on all shifts capable of doing programming start-to-finish and can deal with almost any program related problem. We are high mix, low volume. Our builds are sometimes one of a kind with qauntities of 20 or 30. We empower a

Re: Starting an SMT line

Electronics Forum | Mon Sep 07 02:10:37 EDT 1998 | Tom Blum

Hi Dick We've built up an SMD line for low volume, high product mix over the last two years. Some thoughts: - the reflow system shall have very big thermal power and reserve that results in the same profil with different thermal masses ie products. T

Searching for a tape to seal the end of smd role after using

Electronics Forum | Wed Dec 23 13:29:09 EST 2020 | spoiltforchoice

Yeah, if the convenient non sticky tab for unpeeling is not important to you, narrow tape is another option. "Grid Tape" used for drawing lines on whiteboards is not too sticky and only 4mm wide. Most of the time the lazy option of pulling it really

Re: HTML Tags!

Electronics Forum | Tue Oct 13 12:29:46 EDT 1998 | smd

Basic text tags like etc would allow one to make certain lines or words stand out for greater emphasis. Tags like would allow one to organize the lines and words. Tags like and the like would enable one to organize information into a useful char

Re: SECS/GEM

Electronics Forum | Mon Jun 29 07:17:59 EDT 1998 | smd

Would anybody like to share experiences with adding and using the SECS/GEM interface on a multi-vendor line(DEK,FUJI,PANASONIC, UNIVERSAL,BTU)??? I still don't quite understand how to use this interface. Can someone explain it? Will someone ex

Re: Help! I need Conductive Floor Mats ASAP!!

Electronics Forum | Thu Oct 29 13:06:58 EST 1998 | smd

Scott, Just wondering whether you are all set with the mats and whether you got help via your Forum posting. Would appreciate it if you could share the results here. Thanks, Cunli I need new mats that would be suitable for

  1 2 3 4 5 6 7 8 9 10 Next

smd line optimazing searches for Companies, Equipment, Machines, Suppliers & Information