Electronics Forum | Sat Jun 13 00:25:59 EDT 1998 | Scott McKee
Last October I purchased a Mydata over a Phillips and Amistar. I've done things on my Mydata that is impossible on the other machines. I can build the top side and the bottom side of two boards at the same time (I print both sides at once). I can "
Electronics Forum | Tue Jan 19 10:33:46 EST 2021 | tamasmagyar
Hi Processman, I would say that 92% is realistic if you have low mix - high volume manufacturing. In this case, the only reason for the machines to stop is to: - change reel (on ASM machines you can splice them together, so theoretically with ASM
Electronics Forum | Mon Jul 23 12:50:03 EDT 2001 | nwyatt
In brief, most companies have a board loader, a screen printer machine, various part placement machines (usually at least one chip shooter for small parts and one for fine pitch and larger components), and then a reflow oven. (inspection equipment i
Electronics Forum | Wed Jan 16 20:08:48 EST 2002 | davef
Comments are: * Some people use calibrated boards and components to remove sources of variation when using their CMM to measure placement accuracy. Sources of supply are listed in the fine SMTnet Archives. * It�s unclear that a single board will mee
Electronics Forum | Wed Oct 28 16:54:17 EST 1998 | Dave F
| Sirs, | | what would be a good way to judge the reliability/robustness of a stencil printer or chip shooter? | | Does any equipment supplier specify detailed maintenance schedules? Is there a source of machine failure data (MTBF, etc.)?
Electronics Forum | Thu Jun 02 18:16:26 EDT 2005 | URI
Look into the Juki KE-2060E machine. I have been > extremely pleased with this machine. It will > hold 80-8mm feeders, place 0201 (0603-metric) up > to 74mm square ICs and BGA, 150mm long > connectors. Up to 25mm tall components. It can > ha
Electronics Forum | Thu Nov 17 23:33:08 EST 2005 | darby
If the machine is on it's way..... Question is 1. What if the machine is on its way / remote site...and need to estimate (say 90-95%) probability ? A1. 1 x 8 hour shift 65% x 1 of software estimate or stop watch estimate run on same machine in a dr
Electronics Forum | Tue Feb 01 13:35:32 EST 2011 | rgduval
We have recently taken to setting jobs up in BOM order. So, when the job is kitted (for turn-key jobs), or verified (for consigned jobs), the job is organized in either BOM order or in the order shown on the Components in Layout report printed from
Electronics Forum | Tue Mar 13 09:29:44 EDT 2007 | realchunks
Hi Long, Cmiller is right, check out the vendors and ask for lots of info, they'll flood you with it. You also mite ask to see their equipment working in a facility near you. Also check out IPC-A-610 and J-STD-001. Get to know the different termi
Electronics Forum | Mon Dec 21 08:49:29 EST 1998 | Aric Parr
I used one on SMT at a previous employer. Make sure that you have 3 zones of preheat. Make sure that your operators are trained. The airknifes are extremely difficult to set up properly. Don't use them on high mix lines. We didn't need them once
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD is a company which mainly provide used and new SMT parts, provide repair SMT key parts service,new/used SMT machine trading,SMT consumables and Peripherals equipment,Clean room, ESD..
3th, Tangchang 3rd Road, Hengli, Dongguan City
Dongguan, China
Phone: 8615629932323
