Electronics Forum | Fri Jul 15 13:28:55 EDT 2005 | Brian
A process consists of much more than just thee machine. When developing a cause and effect diagram ffor the process, there are many parameters that fall outside the machine itself. There are Man, Machine, Methods, and Materials. Just monitoring th
Electronics Forum | Mon Dec 17 11:55:08 EST 2007 | chef
I recently had the same problems, solder bridges on every thing I made, different customers boards, etc. I wave with no-clean flux. As I sorted out problems (pin holes, blow holes, splatter, etc.) I found a lot of variable factors. I changed flux,
Electronics Forum | Sun Jan 13 19:44:02 EST 2008 | grantp
Hi, We need to solder a USB plug onto a PCB in our SMT machines, and this is the same type of plug you see on USB storage devices. It's a very flat connector with 4 SMT pins, however the hard part is the bottom of the connectors is the same level
Electronics Forum | Mon Jul 22 09:53:13 EDT 2019 | kylehunter
Hey all! As background, I recently purchased a full SMT line for my company. We have a DEK 265, an assembleon opal xii, and a Heller 1500. Currently our jobs are leaded, and the heller is working perfectly. An upcoming job that we are potentially g
Electronics Forum | Tue Feb 23 12:56:03 EST 2010 | vleasher
Is there any harm in washing SMT soldered with NoClean paste? The PCA has some large thru-hole connectors that we would prefer to do as water soluble on out selective solder but the SMT consists of LGA's and other low parts that we would not be able
Electronics Forum | Wed Jul 05 16:26:51 EDT 2006 | flipit
I had one SMT process engineer using rubber bands to hold a connector on second side reflow. Even the operators told him he was nuts. The zero stick through on leaded devices has come up several times for me. We clip leads first and pin in paste t
Electronics Forum | Tue Feb 23 16:45:36 EST 2010 | dyoungquist
Davef is right on as usual. We are doing exactly what you do. Some smt with no clean paste then the plate through connectors on our selective solder machine using water soluble flux. We then clean with a ultrasonic water process. We do see the re
Electronics Forum | Mon Oct 03 22:16:58 EDT 2005 | Ken
If that's the case, let your customer go. I have run into this situation recently. Q. Why do you not run a dedicated line for lead free? A. You (the customer) give less than 12 weeks forcast and expect us to have a dedicated line for your product?
Electronics Forum | Thu Dec 08 12:39:39 EST 2016 | deanm
We have a name brand aqueous batch cleaner that uses a chemical and DI water to clean ROL0 flux from our PCBs. It does ok most of the time for SMT boards and we want to include through hole assemblies as well which should be a better cleaning process
Electronics Forum | Tue Nov 06 10:06:33 EST 2018 | davef
Electronic Connector Industry News Resources + Surface Finishing + Metal Finishing + Products Finishing + Interconnection World (Connector Specifier) Electronic Connector Associations + IEEE USA + International Electronics Manufacturing Initiative (
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, China
Phone: 0755-33578694
