Electronics Forum | Tue Dec 09 10:58:12 EST 2014 | rgduval
I've always assembled those style connectors by hand. They require paste on both sides, correct? With that variable, I've never considered trying to do them with paste/reflow. Cheers, ..rob
Electronics Forum | Wed Dec 03 11:55:42 EST 2014 | spoiltforchoice
I think there are several answers: 1)Design Fail - slap whoever created it 2)Fit that connector as a manual process after the PCB is finished. 3)Print side 2 using a jet printer 4) Shield the fragile LGA and reflow it twice anyway. 5)Use a thicker PC
Electronics Forum | Wed Dec 03 10:44:03 EST 2014 | kkay
We have a smt connector on side one of our pcb that overhangs through the board to the second side. We can't figure out how to print the second side with this part sticking out. Unfortunately we cannot run the second side first due to an LGA that has
Electronics Forum | Tue May 26 22:13:15 EDT 1998 | Pat Copeland
R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recommende
Electronics Forum | Wed May 27 13:42:08 EDT 1998 | Chrys
| R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recommen
Electronics Forum | Wed May 27 14:35:52 EDT 1998 | Justin Medernach
| | R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recomm
Electronics Forum | Sun Jun 07 09:43:11 EDT 1998 | Bob Willis
There are some guidlines on design and through hole reflow on my web site to download. Also on pin in hole reflow the SMTA Office has a document on using the tecnology. | R&D is currently designing a board with smt components on both sides of the bo
Electronics Forum | Wed May 27 10:19:43 EDT 1998 | Jerry
We have no problems but orientation does matter. Orient with longest side of component body perpendicuar to wave. In other words the same preference as with through hole DIPS. Idea is the same as for through hole, that the surface tension will ten
Electronics Forum | Mon Dec 03 13:48:38 EST 2007 | mariusro
Hi Krebbe, Why not trying DEK 248 with vision. It's a semiautomatic printer with fully fine pitch capability, works just fine!
Electronics Forum | Mon Dec 03 14:17:38 EST 2007 | valuems
Hello You can give us a call for a printer, if you would like. Call 740-403-9406 Harry
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
winsouce.jpg)
