Electronics Forum: smt machine perform nozzle centering check (Page 1 of 12)

Pressure check for SMT machine placement.

Electronics Forum | Wed Mar 31 01:14:49 EST 2004 | Peter -CP40

Eric, You should be able to monitor the pressure of your nozzles by selecting: Diagnostics / Vacume check, depending on the type of machine you are running. When you cover the end of the nozzle, you should get a reading of about 500. This means it i

Pressure check for SMT machine placement.

Electronics Forum | Mon Apr 12 04:56:54 EDT 2004 | qualitel

Hi Eric, Every mounter have a standard count and "release" off the component. The sample and cost saving way is to use the paper (e.g: 4mil,5mil...thick) to measure. Just place on the PCB with supoort base below and release the nozzle step by

Re: SIPLACE nozzle configuration

Electronics Forum | Wed Jan 28 15:35:47 EST 1998 | Tommy Turner

| We have some trouble adding a IC head Nozzle to a | Siemens Siplace machine. | It seems like the machine don't want to recieve | new MA data, coz even if we restart the line | the old nozzle configuration will be used. | Anyone know what we do wron

juki smt machine 2060 error E611030

Electronics Forum | Mon Nov 14 03:48:18 EST 2022 | frankchan

Maybe also check the air pressure, the lack of air pressure could also sometimes make the head lose grip on the nozzles

smt scrap reduction

Electronics Forum | Wed Jun 15 16:54:33 EDT 2005 | linny999

Siemens is an excellent platform. To reduce your scrap:- Carry out the specified maintenance, especially the segments and valve plungers; Calibrate revolver heads to benchmark. Remove the tables, smooth the magnetic strips, clean the mounting faces,

Re: Fuji CP6 nozzle reflective disks

Electronics Forum | Thu Jun 15 14:20:21 EDT 2000 | Kevin Simpson

Hi Peter, The Disk you are refering to can be outsourced from several different vendors. The thing to be careful with is getting a consistant colored disk. You don't want to have etc... some dull/bright..etc. We have found one local vendor we use.

CP-642: What reset nozzles at start of nozzle centering?

Electronics Forum | Thu Mar 22 17:18:17 EDT 2018 | rodrigo

Hi all, Our (new/used) CP642 resets the nozzles heads first time I do a nozzle centering after power on. But we're getting errors st17 and st19 and while working on the sensors I noticed that it does not resets the heads before I start a nozzle cent

Pick and Place machine dropping parts

Electronics Forum | Mon Jul 13 06:30:59 EDT 2009 | hcarrasco

1.- Check your vacuum a.- Check filters b.- Check air flow (the vacuum is generated by a Ventury using air flow, not air pressure) c.- Vaccum vias (Possible linth inside the vacuum lines) 2.- Check the nozzle condition (Probably broken o

Smt 'pick and place' machine issues

Electronics Forum | Wed Nov 29 01:09:17 EST 2006 | Guess

I would suggest checking the feeder, MVF and MSR are both turret type and dont have the capability auto pik adjust in y. Y offset pick up would lead to : 1. Over turn component. 2. Missing component. Turret sequence is pick, recognize an

Can anyone tell me that between Mirtek & Kohyoung which AOI machine will be better and why?

Electronics Forum | Thu Feb 12 16:42:33 EST 2015 | hegemon

I can only speak for Mirtec and Yestech AOI for SMT Solder Inspection. We do use Koh-Young AOI for Solder Paste Inspection. As usual ,you need to identify exactly what it is you are trying to achieve with your AOI, if you are just trying to fill a

  1 2 3 4 5 6 7 8 9 10 Next

smt machine perform nozzle centering check searches for Companies, Equipment, Machines, Suppliers & Information

KingFei SMT Tech
KingFei SMT Tech

Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab

Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider

Building A, Jiepeng Square, Fuyong
Shenzhen, China

Phone: 0755-33578694

Thermal Interface Material Dispensing

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
Void Free Reflow Soldering

World's Best Reflow Oven Customizable for Unique Applications
Pillarhouse USA for handload Selective Soldering Needs

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
High Throughput Reflow Oven

Benchtop Fluid Dispenser
Professional technical team,good service, ready to ship- Various brands pick and place machine!

Private label coffee for your company - your logo & message on each bag!