Electronics Forum | Wed Jun 11 16:41:57 EDT 2014 | isd_jwendell
With Essemtec software you can specify to turn on vacuum once the nozzle is down at the part. The default method is to turn on the vacuum while the nozzle is up, but starting to move down. For light/tiny parts this can have the effect of making them
Electronics Forum | Wed Jul 09 12:00:25 EDT 2014 | bobpan
You have a rather old machine that you are running....now realizing this you need to check some things. 1. Clean the scales in the x and y direction. On some of the encoders there is an led to see if its reading correctly....Usually it turns green b
Electronics Forum | Fri Jul 18 10:10:21 EDT 2014 | proceng1
We've got an MPM Accuflex printer that generally works great, but we've had a recurring problem. The powered rail (rear rail) fails to initialize. Sometimes all it takes is restarting the machine to get it to work. At the suggestion of the repair
Electronics Forum | Mon Oct 13 16:32:55 EDT 2014 | tombstonesmt
Designator>Part Number>Alternate. 2D labels are placed on all slots of the machine, operator scans slot, scans reel with unique material ID. Green light if it's good, red light if it's bad. Our software cannot lock out a machine if there is an incorr
Electronics Forum | Sun Oct 19 06:42:01 EDT 2014 | timbo292832
im designing a circuit that will require the use of a edge connector so it can connect to another circuit. i need to do this so i can get both micro controllers communicating i have done a bit of research and am thinking about using a pcb manufact
Electronics Forum | Sun Nov 23 01:38:49 EST 2014 | alexeis
Hi, We have clients who developed a similar model and even some of them turn it on for some time. The problem is the high cost of ongoing maintenance. What is true, the system allows to study weak places of pre-production and our customers were able
Electronics Forum | Mon Feb 02 03:23:26 EST 2015 | alexeis
Hi, Most of our customers perform DNI check. Some of them give a special focus on the issue when it is a new product (NPI) or change version (ECO/ECN). Our customers perform tests on AOI machine and feed the results into a software tool called TopoQ
Electronics Forum | Mon Feb 16 22:34:24 EST 2015 | anvil1021
WEll unfortunately I know the answer to your dilemma all too well and I will make it easy for you. The Koh Young takes a miracle to program and the Mirtec has a superior software and 3D system when you have the MV9 system. Just to day I was measuring
Electronics Forum | Tue Feb 17 09:33:43 EST 2015 | emeto
Hello, I have two of these for the last 3 years(MV-7xi). Buy the machine with the best camera they offer and with the telecentric lens - it gives great view and resolution. I had to replace the controller for conveyer open/close on both of them. I a
Electronics Forum | Wed Feb 25 09:09:24 EST 2015 | spoiltforchoice
Are we talking a professional device that takes something like the Squink/Voltare/EX1 projects on Kickstarter and delivers something that could be confidently used commerically? Would it be strictly a prototyping tool or would it also be suited to lo
PCB Electronics Manufacturing Automation Software for EMS, OEM & ODM manufacturers. Over 3000 customers worldwide!
116A Research Dr.
Milford, CT USA
Phone: (888) 486-4246