Electronics Forum | Thu Nov 20 18:57:52 EST 2014 | warwolf
I can only say it looks okay for what you need, you will want a dual wave system it can make things so much easier. One thing to check would be the wave nozzle sizes I can see that the conveyor will do up to 15" but thats not to say the nozzle is
Electronics Forum | Thu Oct 26 08:59:56 EDT 2000 | Antonio A. Medina
Ok guys, I need help. Here's the deal. We're getting micro solder balls under discreets on the bottomside of the board. Here's my set up... MPM screener w/vacuum plate 6 mil metal screen with 90% circular (rounded) apertures 7 mil (measured) past
Electronics Forum | Tue Dec 17 12:53:28 EST 2002 | russ
You looked one page to far in the IPC book! Fillet height of 75% is acceptable for all 3 classes. Per IPC 610 rev. C Section 6 table 6.2. A. Circumferential wetting on Primary side (top)between lead and barrel (not anualar ring) Class 1 Not spe
Electronics Forum | Thu Jul 15 15:55:41 EDT 1999 | nards penalosa
| | We have been encountering diminishing ball shear readings these past few weeks, despite the fact that we did not change any ball shear tester parameter. Our reflow parameters are also within spec limits. ( 210-220 deg C max temp. and 40-60 sec d
Electronics Forum | Thu Jul 15 12:26:56 EDT 1999 | Earl Moon
| We have been encountering diminishing ball shear readings these past few weeks, despite the fact that we did not change any ball shear tester parameter. Our reflow parameters are also within spec limits. ( 210-220 deg C max temp. and 40-60 sec dwe
Electronics Forum | Thu Apr 17 13:00:28 EDT 2003 | Takfire
Russ, The caps are 0603 case size. I am not sure about the manufacturing details, as I work for the capacitor supplier. The manufacturing details are unclear at the moment, as the customer (South of the border) has not released such detailed inform
Electronics Forum | Fri Dec 17 08:05:00 EST 2004 | davef
Your solder paste is talking to you, follow its message. Listen to the paste. Be at one with the paste. If you insist on ignoring the message of the paste, add more paste, if you just need to complete the last board or so, but you really should ju
Electronics Forum | Wed Aug 26 20:52:15 EDT 2020 | stephendo
One thing about liquid N2 is while it is safe, only let trained personnel near it. I believe if someone got their hand frozen on the side, it is not coming off until the dewer is completely empty and warmed up. And make sure management understands
Electronics Forum | Tue Dec 14 11:08:59 EST 1999 | Wolfgang Busko
Hi Paul, you got to find the reason first before any measures can be taken. You have to determine wether it happend somehow at your site or at the boardhouse, you can�t blame them without reason. As long as it is suspected that more of those panels
Electronics Forum | Wed Feb 12 13:37:22 EST 2003 | dwanzek
I need some input on what good solder thieves dimensions should be. I am limited to solving my bridging problem with solder thieves; all process/wave variables have been adjusted to try to solve this problem. There are several of these connectors on