Electronics Forum | Tue Sep 20 16:19:44 EDT 2005 | gregp
Hello all, I am looking for a general opinion on splicing tapes. It has always been my opinion that splicing was an after thought for the machines that did not allow feeder removal and replacement during machine operation. If the machine has the ab
Electronics Forum | Wed Mar 08 05:17:55 EST 2006 | SAMSUNG user
We have CP60 in the last 2 years, and CP63 1 year. You should check your local C/S about spare part stock, service support, and training for your employees. My conclusion about Samsung Techwin MC's is: cheap, and working well. But dont except too muc
Electronics Forum | Mon Jun 12 17:32:17 EDT 2006 | flipit
Hi, A little off subject but I just finished a quick little experiment where I placed 0201 to 1206 and some ceramic resonators at specific distances off the scored edge. The distances from scored edge ranged from 0.025" on up at 0.025" increments.
Electronics Forum | Mon Dec 22 14:52:18 EST 2008 | wrongway
We run our process like that all the time paste then glue we use same profile as if we were just reflowing paste once in a while we have A plastic bodied part that has that problem we asume it was some mold relase still on the part basicly comtamena
Electronics Forum | Tue Mar 30 05:27:06 EDT 2010 | accuspares
Hi, Can you tell me at what point in the print cycle the error happens and if it consistently happens at the same point? The machine has two crash beams running down either side of the machine as a safety measure to ensure the table is down before
Electronics Forum | Wed Apr 21 14:32:52 EDT 2010 | remullis
These ovens maintain good profiling as long as you stay on top of maintenance. I had 4 150's and 1 125. The biggest headache is keep the plenums cleaned (very messy). Also the blower motors have been replaced a few times on them as well. If I were yo
Electronics Forum | Thu May 12 08:29:54 EDT 2011 | don7888
Hi I am looking at reducing the time it takes for our operators to complete a first off on the first board that comes off the p+p machine. I started off by conducting some RCA to find out what was the main cause of boards failing the first off. From
Electronics Forum | Fri Jan 16 16:01:31 EST 2015 | emeto
GSMs are great machines for many parts, but for the small parts you should look for something better and more contemporary. As it was mentioned in one of the previous posts, the feeder is a big key. I don't think there is feeder for GSM that can supp
Electronics Forum | Fri May 22 22:13:18 EDT 2020 | gabriel1blue
Hi guys we had problems with our old pick and place machines and all the parts data and mark data was lost when we had to restart the machine. We made a copy but it has been so long that we used it that now it's not working. I hope someone has one of
Electronics Forum | Mon Jul 05 10:15:01 EDT 2021 | aurash
I bought KE2050R in 2020 and started nicely all in good order and after 2 days the HDD died on me. I wish I have made a mirror. I manage to make a HDD from scratch and I recalibrated the machine from because I had calibration data stored in flash (I