Electronics Forum | Fri Aug 19 02:05:32 EDT 2011 | ppcbs
We have been developing profiles for BGA process going on 14 years now. We have never had to drill holes or resort to any type of destructive methods for BGA assembly, rework or defect analysis. Depending on requirements, i.e BGA rework or BGA assem
Electronics Forum | Fri Mar 27 05:11:24 EDT 2015 | robertwillis
If you want a step by step guide on BGA look at my NPL/IPC "Defect of the Month" video clips https://www.youtube.com/watch?v=MC4K0eSXH18 For other process issues there are also videos which may assist on other process issues like voids, solder ball
Electronics Forum | Fri Sep 28 01:47:46 EDT 2018 | netvicher123
The followings may be the factors from your description: 1. chain speed and motor speed? 2. is the tin content even? (more or less on one side, or thickness of steel mesh, size of opening) 3. Is there any exception in the pin? 4. is there any level
Electronics Forum | Tue Jul 23 11:06:00 EDT 2019 | majelacquinn
Currently trying to get away from using stencil printing. Looking for information on Micro-Dispensing and dot size using a Vermes MDV-3200A micro jet dispenser. I am using a Indium led free solder that has size 6 balls. With a 100 micron dispense hea
Electronics Forum | Thu May 06 19:21:24 EDT 2021 | markhoch
Verify your aperture reductions in the stencil. Are the solderballs always in the same location? Same size & shape? Is the solder leaching through plated thermal holes from the opposite side of the PCB? Are you using stencil apertures designed to min
Electronics Forum | Mon Aug 23 14:40:59 EDT 1999 | John Thorup
| SMTnetters: | | Does anyone know of a place where I can have some test boards made? I don't need a board with a working circuit, traces or anything like that, but a board similar to those "test boards" that you all see at the Placement Equipment
Electronics Forum | Fri May 15 10:51:12 EDT 1998 | Justin Medernach
| We understand that testing for ionic contamination and surface insulation resistance measure different properties. We assemble printed circuit boards for other companies. We will not get combs on 90% of the boards that we assemble. | We have no c
Electronics Forum | Fri May 15 12:01:34 EDT 1998 | Justin
| | We understand that testing for ionic contamination and surface insulation resistance measure different properties. We assemble printed circuit boards for other companies. We will not get combs on 90% of the boards that we assemble. | | We have
Electronics Forum | Tue May 08 13:39:27 EDT 2001 | genny
Thank you for your response. I have been told that x-ray strength is finding solder volume and pattern root cause defects, and will catch a high % of them - opens, shorts, insufficient solder, and missing components(shape of solder on pad w/o lead i
Electronics Forum | Fri Jan 15 15:06:30 EST 1999 | Earl Moon
| Hello, | | We are qualifying new sources of PWB vendors. We've got the first lot of "produciton" boards in and we want to put them through the paces before turing the vendors on. | | So far, the tests I can think of performing, and that we have