Electronics Forum | Thu Oct 01 06:44:44 EDT 1998 | PARK KYUNG SAM
Are there anyone who can give me the answer about solder ball problem? We have 12 layer PCB and double sided PCB. After one side reflow soldering We found lots of solder ball under the PCB. The solder ball was coming out from via hole. So when w
Electronics Forum | Tue Mar 17 08:20:59 EDT 2009 | scottp
I work for one of the largest automotive suppliers. Our Workmanship Standards pre-date IPC-610 but they are nearly identical in regards to solder balls. We supply to all the major OEMs, including the Japanese, and I don't recall our solder ball sta
Electronics Forum | Wed Aug 18 11:12:04 EDT 2010 | davef
So with your mounting frustration in your inability to zero-in on the factors that drive your solder balling, are you thinking that maybe you need to bite the bullet and design a experimental study to help isolate the key drivers to your solder balli
Electronics Forum | Thu Jan 31 13:01:33 EST 2013 | kmots15
Defect if its not coated. Defect - Class 1,2,3 • Solder balls are not entrapped, encapsulated or attached or can become dislodged in the normal service environment. • Solder balls violate minimum electrical clearance.
Electronics Forum | Fri Apr 05 15:24:14 EDT 2019 | sever_83
What can cause solder balls to appear after conformal coating? Using Dymax 9-20557, light curing for 1.5 mins. Can too much heat from light cure cause solder balls?
Electronics Forum | Fri Apr 05 16:31:55 EDT 2019 | slthomas
Never heard of such a thing. Are you sure the coating isn't just making the solder balls more prominent? Where are the "new" solder balls appearing after coating?
Electronics Forum | Fri Jun 17 23:31:12 EDT 2005 | kenscj
Hi all, currently, we are seeing BGA problem like solder ball misalign, void, solder short (all under BGA, tested with 5DX), after reflow. We examine the solder ball (raw material of BGA), and see that the ball surface is not smooth, will that affe
Electronics Forum | Wed Jan 31 17:04:22 EST 2001 | williamh
Hello all, I am having a problem with solder balls on chip resistors and chip capacitors. I have searched the archives and found some information concerning solder balls but have a couple more questions. 1. What is the realistic industry standard f
Electronics Forum | Thu Aug 19 05:19:31 EDT 2010 | grahamcooper22
I have seen that moisture in pcbs will cause mid chip solder balls. To discount this, take one pcb from a batch that is giving you solder balls and pass it through you reflow oven with no paste or components on (bare pcb)using your normal reflow prof
Electronics Forum | Mon Sep 08 02:39:37 EDT 2008 | akareti
By connector, you mean socket? Connector use for board to board connection from FCI, MFG P/N: 84500-202 What is the material of the connector(socket)? Is it very frigale? Housing: liquid crystal polymer Solder ball: SnPb 63/37 how big are the bal
