Electronics Forum | Tue Sep 01 02:50:40 EDT 1998 | karlin
| We are experiencing shorting on a BGA. The part has a 1mm pitch with a 196 I/O count. The problem seems to pop up without warning & disappear in the same manner. | Our pad design is .020" diameter pads with .025" solder resist diameter. The ce
Electronics Forum | Mon Jun 26 12:12:07 EDT 2006 | Rob
Hi JEM, No, it is not required to attach the pads. They have not plated them either, so even if you try it won't be easy. However, the land pattern does supply you with the pads for the "support" pins to sit on & not get soldered to. Semi-helpful
Electronics Forum | Tue Jun 27 09:49:48 EDT 2006 | jem
Thank You for your help. The switch i did try, would not solder and infact the body of the switch started buring. This spec sheet you provided explains why. The spec sheet i picked off the system from my supplier also did not have this info you've p
Electronics Forum | Tue Sep 01 19:31:36 EDT 1998 | Kallol Chakraborty
| We are experiencing shorting on a BGA. The part has a 1mm pitch with a 196 I/O count. The problem seems to pop up without warning & disappear in the same manner. | Our pad design is .020" diameter pads with .025" solder resist diameter. The ce
Electronics Forum | Thu Jun 17 19:40:11 EDT 1999 | Scott Cook
| first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads. an
Electronics Forum | Thu Jun 17 19:40:27 EDT 1999 | Scott Cook
| first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads. an
Electronics Forum | Thu Jun 17 19:41:29 EDT 1999 | Scott Cook
| | first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads.
Electronics Forum | Wed Sep 22 21:23:03 EDT 1999 | se
| | I've had some trouble pasting a test board for a MicroBGA trial. Most of the paste remains in the stencil apertures. | | The stencil is 6 mil thick, laser cut and electo-polished. | | The apertures are 12 mil in diameter with 20 mil pitch. | | We
Electronics Forum | Thu Sep 23 12:47:48 EDT 1999 | Earl Moon
| | | I've had some trouble pasting a test board for a MicroBGA trial. Most of the paste remains in the stencil apertures. | | | The stencil is 6 mil thick, laser cut and electo-polished. | | | The apertures are 12 mil in diameter with 20 mil pitch.
Electronics Forum | Thu Jun 17 20:48:18 EDT 1999 | Earl Moon
| | first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads.
