Electronics Forum | Mon Jul 23 05:40:58 EDT 2012 | franks
We are having a problem with a 601 pin BGA in that the corners of the BGA are lifting and taking the pads with them. Faults are not always seen straight away so we are not sure at which point the fault is happening. So far it looks as though flexing
Electronics Forum | Tue Aug 07 09:44:44 EDT 2012 | parmar01
Hi All Im new to the forums, And this my first thread. im the production manager at Broyce Control Everything ive learnt about wave soldering is by trail and error i know its not the best way but it has worked for me. The problem i have been
Electronics Forum | Fri Feb 15 05:36:07 EST 2013 | adrianus
Hi Dave, We do not reflow those parts but are merely a supplier. Therefore I need to have our application specs in order. So, in case the customer has a problem I want to be able to properly support the customer. Hence, I'm curious about the details
Electronics Forum | Thu Apr 25 09:57:31 EDT 2013 | jaimebc
We aquired an ERSA ECOSELECT 2 selective soldering machine. So we are going through a learning curve and I would like to hear from ERSA users on this subject. The main concern is to keep the miniwave steady, it seems that it " bounces" a lot and is
Electronics Forum | Tue Feb 11 12:44:32 EST 2014 | cyber_wolf
Jigo, We have never had a need to do internal testing on solder paste, and your paste supplier should be able to tell you what the correct operating temperature range is. All of the big names in solder paste have tight quality control and I suspect t
Electronics Forum | Fri May 23 19:59:26 EDT 2014 | jhaye
hi everyone, I just got some question with regards to the life span of components from the date it was packed from supplier. Does the parts more than 2 years from the date it was process by supplier: 1. Can it still be used in PCBA?? 2. will it not
Electronics Forum | Fri May 30 20:03:14 EDT 2014 | hegemon
Starting with the manufacturers layout is a good start. Tilted parts, bad solder joints, sounds like a wetting issue and the board or the parts. Insufficient solder sounds like the printing process needs some attention. We have used this part in th
Electronics Forum | Tue Oct 14 19:11:44 EDT 2014 | caurbach
We have a 6622CC machine for SnPb boards. A few things you may want to try: - Solderability testing on the components/PCB. - If the fuse holders or copper in the board are sucking up all the heat, try increasing preheat. Some fluxes (like the WS f
Electronics Forum | Tue Oct 27 03:22:43 EDT 2015 | pvogel
I'm looking for some SMD shims or something to solve this problem. We have a coin cell on a PCB and the side that contacts the PCB also has traces under the cell that don't connect to the cell. So I'm after some small dots of something suitable for
Electronics Forum | Fri Sep 28 01:47:46 EDT 2018 | netvicher123
The followings may be the factors from your description: 1. chain speed and motor speed? 2. is the tin content even? (more or less on one side, or thickness of steel mesh, size of opening) 3. Is there any exception in the pin? 4. is there any level
