Electronics Forum | Wed Jan 21 16:55:22 EST 2004 | patrickbruneel
Hi, Are you testing bare boards or soldered boards. Are the test probes in contact with soldered pads or contacting the copper with the osp coating (not soldered). If you could clarify this it would be easier to give some hints for probable causes.
Electronics Forum | Wed Feb 11 16:47:31 EST 2004 | Jim Hampshire
We are looking for industry input on solder mask patterns being used with fine ptch BGAs. Undersized mask openings vs. the land/pad, Solder mask defined lands/pads etc. Thank You.
Electronics Forum | Sat Feb 28 18:09:49 EST 2004 | Indraneel
Hi, I am having some problem during reflow of solder paste. There seems to be leaching of solder paste. Can anyone let me know some solutions to minimize it . Rgds Indraneel
Electronics Forum | Tue Mar 09 21:17:10 EST 2004 | gm05688
When soldering a metalized germanimum window to a nickle plated kovar part, I would like to understand the intermetalic. Does the nickle plate actually melt or will the solder(SN63)simple stick to the nickle and not cause nickle to reflow? Any one ou
Electronics Forum | Sun May 09 06:34:53 EDT 2004 | alex
i want to know that friends what is the angle of conveyor in wave soldering machine to get good soldering , can we adjust angle
Electronics Forum | Mon May 10 20:16:02 EDT 2004 | wdlau
it can adjusted per the machine and your boards, Not a fix for every board, also if you are talking about the LF wave soldering process, it should be moved to largr angle compared to the tranditional sn/pb soldering
Electronics Forum | Sat Jun 12 04:06:33 EDT 2004 | Steve
Hi, Anybody has the experience or information of mounting the SMD 0402 on solder side of PCB by adhesive (apply by stencil printing) and then wave solder the 0402? Best regards.
Electronics Forum | Sat Jul 03 02:13:01 EDT 2004 | yukim
The manufacturer says that since this solder paste has synthetic flux (not natural rosin) it is sensible to humidity. Worked with reflow profiles, but no remarkable improvements. We are changing solder paste every 2 hours.
Electronics Forum | Fri Jun 25 13:35:13 EDT 2004 | tcp
We have beaten the reflow profile angle to death and haven't been able to duplicate the condition, so I don't think that is the problem. The voids were visible on the surface of the remaining solder. Where the lead tore out of the solder left indic
Electronics Forum | Wed Jun 30 22:14:53 EDT 2004 | Chris SF
I get always a lot of evaluations including results from Solder Spread tests, but it seems everybody creats his own test methode. Is there a official Standard or test instruction for Solder Spread Testing such as IPC, MIL, DIN... Thanks Chris