Electronics Forum: solder and paste and problems (Page 1 of 47)

Reflow soldering problems and traces under component

Electronics Forum | Mon Jul 18 12:24:53 EDT 2016 | oleksz

Some people involved in PCB assembly process claim that SMD components reflow soldering problems are often caused by traces running under a component. According to this claim, trace (or any copper) covered by solder mask and placed under SMD componen

Reflow soldering problems and traces under component

Electronics Forum | Mon Jul 18 12:25:30 EDT 2016 | oleksz

Some people involved in PCB assembly process claim that SMD components reflow soldering problems are often caused by traces running under a component. According to this claim, trace (or any copper) covered by solder mask and placed under SMD componen

PLCC 44 and QFP 240 tilting problems

Electronics Forum | Tue Feb 20 18:04:53 EST 2007 | coop

I am not familiar with the YV100XG pick & place but you might want to increase the mount height of these components The double stick tape isn't as thick solder paste. it might be pushing the component too far down causing it to twist. I encountered

PLCC 44 and QFP 240 tilting problems

Electronics Forum | Sat Feb 17 14:21:54 EST 2007 | Muhammad Haris

Hi All, I am using YV100Xg YAMAHA Pick and Place Mounter Machine and I am facing a tilting problem of PLCC 84 and QFP 240 pins ICs. I deeply checked about their vision files and place them on the double sided tape and found them ACCURATE on their pad

SOT23s and paste + glue

Electronics Forum | Mon Dec 22 11:09:21 EST 2008 | mfcat

We changed paste manufacturers rather recently and are now seeing SOT23s falling off after wave solder. These parts have a dual process... we stencil print paste, apply glue, populate then reflow. Only SOT23s fall off, chips are fine. We do not be

Volume and average height of solder paste after printing machine

Electronics Forum | Thu Oct 02 01:47:57 EDT 2008 | myleb

I'm new to SMT. Now, i'm making program for SPI machine to inscpect for solder paste of SP60-MU. I think this is a very good printer but some times, my program shows only 50-60% of volume transfer; and the average height is very high: nearly 200 pct.

Evalution on solder paste and spray flux

Electronics Forum | Wed Jan 26 20:52:06 EST 2005 | Chua

Hi, I'm going to evalute new solder paste and flux for wave-solder. Appreciate you could advise what are the things need to look out during the evalution. Any recommend step or proper way of doing solder paste and flux evalution. Appreciate your he

solder paste ingredients and their effects

Electronics Forum | Fri Feb 09 02:30:50 EST 2007 | Muhammad Haris

What are Resins, Solvents, Activators, and Thickening Agents in Solder Paste and what are their helpful and harmful effects? AND What are the purposes/properties and effects of Sn(Tin), Pb(Lead), Ag(Silver), Bi(Bismuth), In(Indium), Cu(Copper), Ni(

Evalution on solder paste and spray flux

Electronics Forum | Thu Jan 27 11:23:45 EST 2005 | russ

Well first off I wouldn't evaluate paste for a wave process. I would use solder bar instead. Flux - top side fillets and no shorting on the solder side, does it clean well after processing if using water soluble flux. How wide is the process win

solder paste ingredients and their effects

Electronics Forum | Fri Feb 09 12:31:35 EST 2007 | realchunks

Ask Brain Toleno at "circuitsassembly.com/blog" He's a smart guy and works as team lead at Henkel Loctite. Just don't take him out for drinks.

  1 2 3 4 5 6 7 8 9 10 Next

solder and paste and problems searches for Companies, Equipment, Machines, Suppliers & Information

Flux-Free Reflow Soldering

Reflow Soldering 101 Training Course
Fluid Dispense Pump Integration

High Speed Precision In-Line SPI System - Mirtec MS-11


Outstanding liquid dispensing and UV curing, all within one platform, watch the video.