Electronics Forum | Mon Nov 05 14:01:21 EST 2007 | dphilbrick
Not only a wizard but a damn good interrupter too there Dave.
Electronics Forum | Thu Nov 01 22:32:57 EDT 2007 | lvzhu
CSP has pillow, the BGA's ball doesn't combination with the solder paste. also ,the 0402 chip aftet the oven ,the surface looks like many tin ball pile together. how solve this problem. thanks for your discuss.
Electronics Forum | Tue Nov 06 15:07:43 EST 2007 | russ
Sounds like you did not achieve reflow at all, what max temp did you hit in oven? Russ
Electronics Forum | Fri Jul 26 08:25:25 EDT 2013 | emeto
If there is a way to pre-tin the parts, that might help in forming better joint with gold.
Electronics Forum | Mon Jul 29 05:48:35 EDT 2013 | anilw2006
Thanks for support. Is it any special process of pre-tinng? Regards, Anil wagh.
Electronics Forum | Sat Nov 03 09:39:27 EDT 2007 | davef
Flux exhaused or CSP never came to peak temperature * BGA balls don't combine with the solder => Flux exhaused or BGA balls never came to peak temperature * 0402 surface looks like many tin balls piled together => Flux exhaused Start your thermal
Electronics Forum | Fri Jul 26 05:14:38 EDT 2013 | anilw2006
We had a solder joint problem in gold plated PLCC68 ic. We do double sided reflow process with Cookson OL107F paste. First we do top with paste and second with glue process.The solder joint shape and wetting looked normal.In the process of testing
Electronics Forum | Tue Jun 20 15:08:30 EDT 2017 | ranap121212
Hello I have the problem with selective soldering on the robot. Thin balls appear on the laminate. The tin sometimes shoots...? and then the balls are a few millimeters from the soldering point. I tried up or down with temperature, but it did not wor
Electronics Forum | Mon Dec 17 11:55:08 EST 2007 | chef
I recently had the same problems, solder bridges on every thing I made, different customers boards, etc. I wave with no-clean flux. As I sorted out problems (pin holes, blow holes, splatter, etc.) I found a lot of variable factors. I changed flux,
Electronics Forum | Wed Jun 21 19:01:48 EDT 2017 | mac5
Try baking the boards; you may have a moisture problem.