Electronics Forum: solder balls (Page 1 of 213)

solder balls

Electronics Forum | Mon Jul 16 19:27:27 EDT 2001 | eliishee

I have no choice, as per customer's request to remove the solder balls. Can i use water to clean away the solder ball since i'm using RMA solder paste not the water soluable paste.

solder balls

Electronics Forum | Mon Jul 16 19:36:09 EDT 2001 | steven

I hv no choice as per customer's request to remove the solder balls. Can i just use water to clean away the solder balls since i'm using RMA solder paste and not the water soluable paste?

solder balls

Electronics Forum | Fri Jul 06 18:17:34 EDT 2001 | davef

We find no solder balls after washing our boards. It works GREAT!!! ;-) Probably more to the point, look at "Circuits Assembly" 7/01, p 40, "Eliminating Solder Beads In No-Clean PCBs". "Solder mask type & composition are the greatest contributor t

solder balls

Electronics Forum | Wed Feb 07 16:14:54 EST 2001 | Antonio

I've recently read a posting here which said that the person was trying to reduce solder balls. One of the things the person had done was to adjust the reflow profile so as to be hotter and longer in the reflow state. Am I wrong here? I thought th

solder balls

Electronics Forum | Mon Jul 16 09:04:00 EDT 2001 | Hussman

No argument here. But I've don't think I've ever seen solder balls on 0402s. Even when they're placed on narrow G dimension pads, where there is little toe fillet, I've never seen a solder ball. But your idea of reversed homeplates would work grea

solder balls

Electronics Forum | Mon Jul 16 15:49:33 EDT 2001 | Steve

The solder balls you are talking about are caused by too much paste. Reduce the size of the stencil aperatures. Concerning removing the solder balls, the first thing you need to ask yourself is, do I need to remove them. IPC-610, 12.4.10 states, "Ac

solder balls

Electronics Forum | Thu Jul 05 07:34:57 EDT 2001 | steven

what is the main reasons that casuing solder ball during reflow? and how to remove them? (mostly arround the connector leads or between the 2 0402 chips). solder paste is RMA type. need advise. thanks

solder balls

Electronics Forum | Thu May 06 10:28:27 EDT 2004 | Bryan She

Modify your stencil aperture shape...reduce the solder paste deposited on pad,will reduce the solder balls.Be sure your reflow profile are good before doing this.rising slope is very important. This is my opinion.thanks. Bryan

solder balls

Electronics Forum | Thu Jul 05 09:27:05 EDT 2001 | blnorman

Our solder ball problem is linked to moisture. If the paste sits on the board too long (especially during our humid summer months) we experience the problem. As far as the problem being specific to components or areas of the board, maybe some of th

solder balls

Electronics Forum | Fri Jul 06 04:02:28 EDT 2001 | eliishee

Thanks guys for all the input. i'm still struggling to find out the main cause. at time being, urgently need a suggestion of a effective way to remove all these solder balls. THANKS AGAIN.

  1 2 3 4 5 6 7 8 9 10 Next

solder balls searches for Companies, Equipment, Machines, Suppliers & Information



ONLINE IPC Training & Certification
High Throughput Reflow Oven

High Throughput Reflow Oven


SMT & PCB Equipment - MPM, DEK, Heller, Europlacer and more...