Electronics Forum | Fri Jun 15 12:07:13 EDT 2018 | fern
My company is hooking up a delta max wave solder machine but we can seem to get the estop error to go away any one have a any experience with this issue.
Electronics Forum | Mon Jun 18 01:59:32 EDT 2018 | reckless
Thanks for the advice. The sockets I am finding all require some pressure to be exerted which has got me worried if my idea will work. I also came across some hollow carriers for the IC but not sure if it will work without solder.
Electronics Forum | Thu Jul 12 06:29:49 EDT 2018 | uzbek
Have you tried with one part shield? If you did, how many units? Also, was the reason for changing to two-part shield quality of soldering or something else? Thanks for the help
Electronics Forum | Tue Aug 14 08:09:32 EDT 2018 | buckcho
Try something drastic just for testing - turn off cleaning! Then check again the result. Trust me, you can be surprised.
Electronics Forum | Tue Aug 14 09:39:31 EDT 2018 | stephendo
Every place I have ever worked has taped off the gold fingers. Maybe not the first run but within a few runs.
Electronics Forum | Mon Jul 30 17:31:59 EDT 2018 | dekhead
That error message is keyed by a hardware (soldered) link on the backplane board of the Y1 (motor controls), through direct cable to PCIB40#3... check connections both ehds; possibility of multiple PCIB failures?
Electronics Forum | Wed Aug 08 13:24:44 EDT 2018 | boyo462
The Company just certified to AS9100. One of the minor observations related to the method used to measure the lead length to insure compliance with IPC requirements. Are there any tools/devices/equipment available to measure lead lengths that is repe
Electronics Forum | Tue Aug 14 08:07:40 EDT 2018 | buckcho
Hello, I am not sure what you mean exactly. Lead length is something standard given from components supplier. Pretty much all new AOI machines can measure the length and height of most of the leads on a IC.
Electronics Forum | Wed Aug 15 04:08:04 EDT 2018 | colinbenton
Hi Stephen, it seems they call it differently . What they need is an insruction data they can import to the machine, how the IC is soldered, the relative orientation for some parts,ect.
Electronics Forum | Thu Aug 23 11:07:22 EDT 2018 | stephendo
If you can scrap a board and part then drill a small hole through the other side and attach a thermocouple to a ball in the middle when you run a profile.
