Electronics Forum | Mon Jul 01 19:43:44 EDT 2013 | kumar_antom
Hi there, Its a lead free process and the paste that we're using is with this alloy composition : Sn,Ag,Cu,Bi,In.... Pls refer to the attached temp.profile.... This is a mirror Pcb....Same components on both A and B side.... A side doesn't have t
Electronics Forum | Mon Jul 29 15:30:45 EDT 2013 | markhoch
Nitrogen in Reflow is grossly over-rated...., in my opinion, and in the opinion of several very well known SMT Industry "God Fathers". Way too much $$$, for a slight increase in the process window. If you profile your oven specifically for your pr
Electronics Forum | Thu Aug 01 19:03:30 EDT 2013 | joeherz
I am sick of Kapton. We have varying levels of leftover residues on multiple brands and I'm done chasing this thing. We have tested some wave tapes that were total garbage in years past. Really don't want to go there. Peelable liquid masks - Who
Electronics Forum | Wed Aug 07 16:33:08 EDT 2013 | rway
I did not see the histogram image (didn't scroll down). My point about the flat metal surfaces is they should have a large white total under top-light with red filter. You should be able to distinguish between the two (fillets and no fillets). I k
Electronics Forum | Thu Aug 08 15:41:57 EDT 2013 | simplycomplex85
I will mention purchasing the updated software with him but last time he looked into it he decided against it. So I was trying to see what we could with what we currently have. As for blue filtering, we don't have that that I've seen. Red or white
Electronics Forum | Thu Sep 05 22:36:38 EDT 2013 | davef
Yes, providing your: * Inbound material does not compromise your process. * Soldering processes apply the proper amount of flux and activate it properly * Material handling does not contaminate your boards Recognize that the IPC requirements of less
Electronics Forum | Mon Sep 09 18:10:35 EDT 2013 | davef
I don't know, but here is a link to a paper from the fine SMTnet Technical Library on a similar topic: http://www.smtnet.com/library/files/upload/Wire-Bonding-and-Soldering-on-Enepig.pdf Contact the authors and ask for their advice and help. BR, d
Electronics Forum | Tue Sep 10 10:38:12 EDT 2013 | rway
Most of the PTH components are manually inserted. Some are auto-placed by our UIC machine. The parts are preped before install, so there is no need to trim the leads afterwards. The boards go through wave solder. The UIC machine has a clincher on
Electronics Forum | Tue Sep 17 13:58:56 EDT 2013 | smtventasmex
i have a vitronics Delta 6622CC with a software fail, i turn it on and when i open the software on the CPU, it enter but show me a message of wrong vertion, and then i choose ok and software close it self, let me know if some one of you have this fai
Electronics Forum | Fri Sep 27 01:54:32 EDT 2013 | isd_jwendell
I like my JBC. I don't like the price of the tips, especially when you need 2 for the tweezers. The tips last a long time though. At one point JBC had a problem with the tweezer tips dieing early, but they appear to have fixed that problem. I also h