Electronics Forum | Fri Nov 11 22:14:11 EST 2022 | kumarb
I would certainly test the boards but from our experience, the vacuum sealed in room temp, no issues at all with our PCBs sourced from Suntak / PCB Founder / Fastprint / Yaxinda / JLCPCB well past the 12 month mark. We building boards purchased 5-10
Electronics Forum | Tue Nov 29 14:37:43 EST 2022 | SMTA-64385790
It is often said to avoid card board material in SMT area due to dust, i.e. card board boxes etc. are dust generators. Except from house keeping, cosmetic and optical issues, what other concerns are there in SMT/Electronics manufacturing? Solder join
Electronics Forum | Sun Dec 25 09:51:54 EST 2022 | msirifat
Hello, We use OSP-finished PCB. One component (transformer) will be delayed (approximately 4 months) to getting in our hands. We want to partially complete the PCBA (both SMT & MI) in the meantime and later insert the transformer upon arrival thr
Electronics Forum | Wed Jan 11 06:07:11 EST 2023 | sarason
Also small quantities of solder paste can work its way into the shaft making pickup vacuum erratic also between the inner and outer shafts making travel up and down erratic which can cause bad placement. We always used to clean the nozzles in isoprop
Electronics Forum | Mon Jan 23 18:14:26 EST 2023 | emeto
Try to stay away from this process in general. I have worked with different brands and all of them have some pros and cons.It is a lot to maintain and I am not sure if it will be faster. Repeatability of these machines is very hard to sustain. You sh
Electronics Forum | Tue Jan 24 11:49:11 EST 2023 | dontfeedphils
"Try to stay away from this process in general. I have worked with different brands and all of them have some pros and cons. It is a lot to maintain and I am not sure if it will be faster. Repeatability of these machines is very hard to sustain. Yo
Electronics Forum | Fri Mar 17 14:59:50 EDT 2023 | proceng1
OK, does your axis screw have the flex coupler or the magnetic coupler? Which axis is it? Did you turn off soft limits? If it's out of range, soft limits won't let it move by controls. I need to know which axis before I can get too far into this. I
Electronics Forum | Mon May 22 22:05:53 EDT 2023 | daniel_stanphill
We ended up purchasing direct from Superior. It was like $300 for one gallon so pretty steep but considering it should last me over a year and save untold hours of labor during the course of that year, small price to pay. Side note: If at all possi
Electronics Forum | Fri Jun 02 06:22:47 EDT 2023 | calebcsmt
We have been using our Pillarhouse Handex Selective for just over a year now. We are finding the nozzles are lasting approx. 3-5 months with w/ SAC305 @ 305C. Generally don't have any issues with wetting and with good maintenance, proper use of th
Electronics Forum | Sat Jun 10 00:47:25 EDT 2023 | frankchan
Hi, been following your requests for a while, Ovens are our specialties and are manufactured in our warehouse. 3 years warranty supported. For mounter alone, we can support multiple choices based on your requests, plus the selective oven, I think you