Electronics Forum | Fri Apr 03 08:22:36 EST 1998 | Scott Cook
| At this moment in time we are using water soluble solder paste on our PCBs these are cleaned using water only, agitated with ultrasonics. After drying a white/grey residue is left around solder joints. Reflow profile is fine and a reliable wash pro
Electronics Forum | Wed Apr 08 13:46:22 EDT 1998 | Scott Cook
| Sylvia, | I believe you will find that contrary to Scott Cooks submission, that the work carried out by Robert Clark of Hughes Missile Systems at (then) Tuscon Arizona formed the basis of the MIL-F-14256 spec which "Qualified?" or at least "Approve
Electronics Forum | Tue Mar 17 13:11:58 EST 1998 | ETS, LLC
ETS (Energy Technology Systems) is a manufacturer of Solder Reflow and Curing Ovens for the Electronics Industry. We offer a specially configured oven designed for processing of Pin in Paste processes as well as double sided mix technology boards. I
Electronics Forum | Mon Mar 02 09:45:08 EST 1998 | Justin Medernach
| Can anyone advise a good starting point for a temp profile for | on 0.05" and 1206 component boards? These boards are simple | by todays standards and do not contain any fine pitch or | other special components. | Thanks in advance... | MM Mike,
Electronics Forum | Mon Mar 02 23:08:50 EST 1998 | Scott McKee
| | Can anyone advise a good starting point for a temp profile for | | on 0.05" and 1206 component boards? These boards are simple | | by todays standards and do not contain any fine pitch or | | other special components. | | Thanks in advance... |
Electronics Forum | Wed Aug 08 15:31:30 EDT 2001 | johnw
Hi folk's, I'm looking for some hint's here. Got a board from the customner that is ceramic, and it's 2.2mm thick. I've got a couple of RF connectors that I need to solder, problem is I can't get any flow up the PTH's. The pin's are gold on the conn
Electronics Forum | Thu Aug 09 16:41:12 EDT 2001 | johnw
Dave , you know it's your cheery disposoition I love.... Ok so the process: Process is Double sided reflow for SMT & PTH via the wave. Like I said or did I, I forget and can't check back...it's a spray fluxer with noclean mutlicore NR3s-06 water b
Electronics Forum | Wed Aug 22 22:22:52 EDT 2001 | davef
First an administrative point, you can edit the postings that you make on SMTnet. Look for the yellowish-greenish EDIT button at the top of your posting. Second there are over 170 postings on intermetallic* on the fine SMTnet Production Forum Archi
Electronics Forum | Thu Sep 06 10:55:37 EDT 2001 | davef
saturation occurs at ppm levels. Remember, IPA is extremely flammable and its bulk use makes the plant liable to all sorts of quite repressive safety rules/regulations and so on. Ignoring these rules exposes the owner to fines and possible plant cl
Electronics Forum | Tue Oct 16 07:00:06 EDT 2001 | genglish
Hi all, I have a problem and would gratefully take on suggestions, firstly let me explain the situation: We are currently screen printing adhesive, using a method similar to DEKs 'Pump Print', The adhesive we are currently using is supplied from Alp
BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.
Equipment Dealer / Broker / Auctions
13227 Royal George Avenue
Odessa, FL USA
Phone: 813-992-2437
