Electronics Forum: solvent (Page 1 of 68)

MPM SPM solvent sprayer

Electronics Forum | Fri May 21 14:51:29 EDT 2004 | cyber_wolf

The sprayer is supposed to be aimed at the part of the wiper paper that comes in contact with the stencil.(Not @ the stencil) We have 4 SPM's and 2 AP25's and never had a need to use the solvent sprayer. Dry wiping works just fine. Print on !......

solder paste solvent

Electronics Forum | Tue Jan 22 09:31:32 EST 2013 | electronar

Dear people... good day to everyone. we need to know what kind of liquid we can use like solder paste solvent. Thank you

solder paste solvent

Electronics Forum | Thu Jan 24 11:30:16 EST 2013 | davef

I'm not aware of a solder paste solvent. What do hope to accomplish with such a material? May be we can suggest an alternative.

solder paste solvent

Electronics Forum | Wed Jan 30 17:12:45 EST 2013 | dyoungquist

Solvent makes me think of dissolve which leads me to cleaning something. If you are trying to clean stencils, blades, etc. try this link to the product we use: http://www.techspray.com/product-info.php?pId=3&cId=17

MPM SPM solvent sprayer

Electronics Forum | Fri May 21 13:17:20 EDT 2004 | bman

Can someone who has one of these printers please tell me what the solvent sprayer is supposed to be aimed at. Ours seems to be aimed to hit the roll of new stencil wipes, but it seems like it would be more effective if it was aimed at the part of th

solder paste solvent

Electronics Forum | Wed Jan 30 09:41:36 EST 2013 | eniac

I think, the target is one - restore the properties of solder paste. Fluxing properties, adhesive ability is main.

solder paste solvent

Electronics Forum | Wed Jan 30 15:10:09 EST 2013 | hegemon

Restoration of the fluxing properties? Can't see adding a liquid flux to a solder paste (assumed expired shelf life) in order to "restore" anything. If the volatiles in the original paste are gone, then adding more carriers and volatiles will not pr

solder paste solvent

Electronics Forum | Wed Jan 30 17:23:07 EST 2013 | dyoungquist

In response to hegemon... This is not a recommended practice but..... We have added a few drops of water soluble flux to our water soluble solder paste when the paste is on the stencil. This was after the paste had "dried" out a bit. We have had

solder paste solvent

Electronics Forum | Wed Jan 30 19:59:22 EST 2013 | hegemon

To dyoungquist - I understand that situation. I can see where that is possible in the case that your paste has gone a bit dry. As you said, not neccessarily the recommended practice, and yes your print regularity can go out the door. However, I th

Cleaning solvent for no-clean board.

Electronics Forum | Fri Jun 07 14:58:03 EDT 2002 | Ron Costa

Petroferm BioAct 105 works well for Indiums SMQ-92J

  1 2 3 4 5 6 7 8 9 10 Next

solvent searches for Companies, Equipment, Machines, Suppliers & Information