Electronics Forum | Wed Jun 14 10:14:20 EDT 2017 | emeto
IPA is flammable and that is why no company will tell you to use. I've used many solutions and IPA works just as fine as any other solution if not better. Definitely use solvent in your cleaning. If it was meant to clean without solvent we wouldn't t
Electronics Forum | Mon Jan 29 04:51:43 EST 2018 | mauricea
Dear all, Sorry for my bad english We use a MPM Momentum year 2014. This is the second time, that we have a matter with the M14 (SOLVENT ROLLER MOTOR). The 2 times, the IC U1 on the rear control module is brocken. Have you all ready this kind of ma
Electronics Forum | Fri Dec 21 18:44:23 EST 2018 | ramsus
hello I chose to change the wet cleaning paper and dry paper with wet cleaning mode activation but I have a solvent leakage problem (solvent leak alarm) I detected a leak at the level of cleaner. can you get an idea about this problem and can help m
Electronics Forum | Mon Jul 24 15:50:51 EDT 2023 | proceng1
I am going to be using a pressurized dispenser for Chemtronics CM1 peelable mask. I need to find a solvent that will work for flushing the system. I tried Xylene that we have here and it does ok, but not as good as I'd hoped. It works very well fo
Electronics Forum | Sat Aug 22 16:07:31 EDT 1998 | Manuel Cornejo
| | Require a conductive adhesive - either isotropic or anisotrpic - which can be used for 100micron oitch devices. | | Must be resistant to solvents such as MEK and acetone. | | Cure below 150C, with possible potential for rework of the conections.
Electronics Forum | Thu May 26 19:32:13 EDT 2005 | Mike Konrad
Three popular methods: Resistivity of Solvent Extract (ROSE) Test Method IPC-TM-650 2.3.25: The ROSE test method is used as a process control tool to detect the presence of bulk ionics. The IPC upper limit is set at 10.0 *g/NaCl/in2. This test is p
Electronics Forum | Wed Oct 10 13:51:08 EDT 2007 | petep
Coilcraft has posted the following and I am wondering how you folks are handling the use of coils in a Water Soluble world. PCB Washing and Coilcraft Parts Coilcraft tests for resistance to solvents per the following specification: Resistance to s
Electronics Forum | Wed Oct 18 16:33:26 EDT 2000 | Dave F
Mike: An omega meter has very little to do with ion chromatography. * IPC TM-650, 2.3.25B, Detection and Measurement of Ionizable Surface Contaminants is a process control method that washes boards with an isopropanol / water solution and measures
Electronics Forum | Wed Oct 21 14:28:17 EDT 1998 | Earl Moon
| I'M LOOKING FOR A SOLVENT TO MAKE REMOVING EPOXY FROM THE BOTTOMSIDE OF BOARD ON SMT COMPONENTS. THIS IS MOST IMPORTANT AFTER THE EPOXY HAS CURED AND EVEN RAN THROUGH THE WAVE. I'M LOOKING FOR A WAY OF | MAKING THE REWORK PROCESS ON THE CURED EPOX
Electronics Forum | Thu Aug 20 09:19:19 EDT 1998 | JUSTIN MEDERNACH
| Require a conductive adhesive - either isotropic or anisotrpic - which can be used for 100micron oitch devices. | Must be resistant to solvents such as MEK and acetone. | Cure below 150C, with possible potential for rework of the conections. MR. T