Electronics Forum: sony placement head (Page 1 of 37)

contact 3av head homing errors

Electronics Forum | Mon Sep 20 06:29:27 EDT 2010 | darrenleebs

i have an old contact 3av pick and place machine that has started to display placement head position errors. the machine seems to start working if you switch it on and leave it for a couple of hours to warm up. has anybody had simillar issues with th

Juki 740 head calibration jig?

Electronics Forum | Thu Jun 07 18:59:41 EDT 2018 | smonk

Hello, I have a Juki KE 740 pick and place machine which i purchased used about 1 year ago. I am trying to run the self calibration feature which measures the offset of the placement heads to the camera on the group head. According to the manual som

uBGA placement

Electronics Forum | Fri Jul 30 13:39:45 EDT 1999 | Upinder Singh

Hi all, What is the typical placement head pressure for the GSM1 for placing the micro / chip Scale BGAs ? Thanks Upinder =======

Re: placement of 8 ml smt components

Electronics Forum | Thu Sep 10 17:10:00 EDT 1998 | Steve Gregory

Hi Tim, 8-mil huh? Boy, that's getting down there...you know, placing 8-mil is one thing, but printing solder paste on 8-mil pitch is another. Most of the time when I've seen 8-mil pitch on a board it's been attached with hot-bar...but I guess

Specialised SMT equipment-------------chip dispense head needed

Electronics Forum | Tue Feb 12 10:51:46 EST 2002 | stefwitt

Dave is right. There is no machine on the market which can handle a 1.5 m long "board". If you or someone else will have to tinker with a custom made machine, it will be less expensive to use a used machine ( I could be offering some used Siemens mac

Axis head 2 z velocity error

Electronics Forum | Fri Jan 12 08:41:12 EST 2007 | geb

Hi, Our GSM1 pick and place machine has an Axis head 2 Z velocity error. None of the spindles of Head 2 work during placement and it brings up the error message. It will not proceed after that. I have tried lowering and raising the spindles in the

Samsung CP45 head camera alignmnet fault

Electronics Forum | Thu Oct 24 23:19:55 EDT 2013 | wesleyintelli

Heads 2 & 3 on our CP45 are placing poorly. We believe that the head cameras are adjusting the component positions incorrectly since the placement is perfect when vision alignment is turned off. Does anyone have any experience with this issue or acce

SMT placement machines. Where are we going ?

Electronics Forum | Tue Jun 02 22:32:09 EDT 2009 | mikehe

I can tell you from current experience that the Sony and Assembleon machines are bullet proof. I just placed 0201's on the Sony G200 and ran it at wide open throttle and it didn't skip a beat. You have to keep in mind that the speed ratings that the

Re: uBGA placement

Electronics Forum | Wed Aug 04 14:32:02 EDT 1999 | Barney Whalen

| Hi all, | | What is the typical placement head pressure for the GSM1 for placing the micro / chip Scale BGAs ? | | Thanks | Upinder | ======= | Hello Upinder, The typical placement pressure for a GSM1 with Flex head is 150-170 grams. You can p

sot363 placement issues

Electronics Forum | Wed Apr 19 14:46:08 EDT 2006 | cuculi54986@yahoo.com

We run Panasonic chipshooters, so our small nozzles are not cylindrical. We would use the smallest nozzle we have on our heads which I believe is a Panasonic "MF" size, the same nozzle we'd use for 0603 size components.

  1 2 3 4 5 6 7 8 9 10 Next

sony placement head searches for Companies, Equipment, Machines, Suppliers & Information