Electronics Forum: spent (Page 1 of 33)

SMT Disasters

Electronics Forum | Fri Jul 11 14:08:06 EDT 2008 | ck_the_flip

There is nothing wrong with working "remote hours". Why does everyone think we are slackers just because we work 4-5 hours a day at work. There is a ton of remote time spent thinking about work whilst driving too and from work, at home, working out

OMNIFLOW 10

Electronics Forum | Tue Sep 09 08:05:15 EDT 2003 | davef

Se�or Tech: Exploring other options is good, but at the end of the day $2k might be money well spent.

top side remelt?

Electronics Forum | Mon Mar 26 13:07:44 EDT 2007 | realchunks

Not really. Spent half of it at work. And you? Did you have a fiiiiine weekend?

Silly Attrition Levels

Electronics Forum | Mon Apr 28 11:37:30 EDT 2003 | terrapinstation

Chrissie, There is no "silly" question. It seems to me that, not with standing the issues highlighted in your posting, notably - risks, time, etc.. Your time would be much better spent determining the reason for the reject. If your placement equip

Chemicals in Aqeous Cleaners

Electronics Forum | Fri Apr 23 07:37:49 EDT 2004 | pjc

Waste Water from any cleaner must be recycled or treated before going to drain. That is the case in most states in the USA. The wash solution that is mixed with a chemistry cannot be processed thru a water recycling system, only the rinse water can.

Selective Solder Machines

Electronics Forum | Tue Nov 20 15:06:34 EST 2007 | solder_master

I looked at the Kiss104 and the SPA-400 at the SMTA show in Orlando. I spent an hour with the ACE rep, and walked away totally confused as to how the machine is programmed. I spent 10 minutes with the rep from APS Novastar, and using their Photoscan

Re: Solderability on Immersion Gold

Electronics Forum | Thu Mar 02 11:56:04 EST 2000 | Dave Pearcy

We are experiencing the same problem. We just spent $1,200 to figure out that the "black stuff" is a Nickel Oxide. I am going to look into the profile end of this problem. Any suggestions would be very helpful. Dave

Re: Dbl-Sided Reflow Question

Electronics Forum | Fri Jun 09 11:11:24 EDT 2000 | po

If you spent alittle more time on your bar graphs/time lines and less on the floor, the answer would be obvious!

Re: Solderability on Immersion Gold

Electronics Forum | Thu Mar 02 11:56:04 EST 2000 | Dave Pearcy

We are experiencing the same problem. We just spent $1,200 to figure out that the "black stuff" is a Nickel Oxide. I am going to look into the profile end of this problem. Any suggestions would be very helpful. Dave

Rework Technique

Electronics Forum | Thu Aug 02 18:58:44 EDT 2001 | LloydG

Hey Bayan, (Apa khabar) Very good reference is IPC books/manual (www.ipc.org), and some time spent on actual training.... rgds

  1 2 3 4 5 6 7 8 9 10 Next

spent searches for Companies, Equipment, Machines, Suppliers & Information

Large PCB Dispensing System

Software for SMT placement & AOI - Free Download.


High Throughput Reflow Oven
pcb assembly supplies

ONLINE IPC Training & Certification
Green Monster Stencil Wiping Rolls

500+ original new CF081CR CN081CR FEEDER in stock