Electronics Forum | Tue Jan 06 14:44:00 EST 2015 | gafur
hi...i have problem with my spi kohyoung machine..the software can't load other model after running production..No one knows with this issue ? thank's
Electronics Forum | Sat Jan 17 06:29:23 EST 2015 | buckcho
Hello, I have seen the machine doing this problem after being on bypass. Try closing and opening the program again. Maybe the program can have problems, try making it from the beginning. I hope you fixed your problem.
Electronics Forum | Thu Apr 26 19:06:08 EDT 2007 | grayman
In short this guys are not well updated on the new technology of SPI. True, 3D IN LINE SPI is no longer a slow machine. Try checking some brand like Cyberoptics,Synapse imaging,SEIMENS,KOHYOUNG and many others...they can match the speed os some mount
Electronics Forum | Tue Aug 13 11:40:57 EDT 2019 | raprite
Hi, I am actually analysing several AOIs for my company. I am evaluating an Omron one, Parmi one and Pemptron one as well. I want the AOI machine works as SPI as well. The only one that has this option (AOI 3D + SPI), is Pemptron one. Do you have
Electronics Forum | Tue Sep 17 02:05:22 EDT 2019 | alanyang
First Article Inspection system is recommended. We use FAI , SPI and off-line AOI. FAI is very important for middle to high volume PCB assembly.
Electronics Forum | Tue Aug 06 16:49:57 EDT 2019 | jmedernach
HI, The short answer is, "whichever machine finds your defects." I would suggest evaluating machines based on a common vehicle. Make a bad board and identify the defects. Make a good board and have your vendor teach and tune the machine to the goo
Electronics Forum | Fri Apr 27 10:33:58 EDT 2007 | ck_the_flip
Jeremy, well said! Thanks for "validating" my theory... LOL I agree that the sampling frequency, AND methodology are key things with 3D inspection. 3D will give you some insight onto how your paste (rheology, viscosity, thixotropy)AND process are
Electronics Forum | Tue May 22 10:01:19 EDT 2018 | jacson_vu
Hi All, Could you share for me inspection spec that you set up for SPI machine ? Which standard you base that? IPC or something like that. So far, my factory set up as below: Area , volume , high are: lower limit is 60%, upper limit 160% for 0201 ch
Electronics Forum | Wed Jun 06 06:16:49 EDT 2018 | jacson_vu
Thank for your sharing. I am also trying find out the best parameter for our product.
Electronics Forum | Tue Jun 05 02:10:01 EDT 2018 | buckcho
Hello sir, Limits in SPI can vary a lot, also depending on finishing of the pcb. For example 170% volume on an IC (assuming is fine pitch) can be okay for ENIG, but very bad if HASL. For are I would recommend that you use either 50-130, or 60-135 max
Focusing on the SMT field for more than 15 years, QYSMT has been committed to meeting the needs of customers and partners. Our mission is to provide the best solutions while helping to reduce costs and increase efficiency.
Manufacturer / Equipment Dealer / Broker / Auctions
2nd floor, West side, Building 12, Hengmingzhu Industrial Park, 32 Xiangxing Road, Shajing Tongfu Industrial Zone, Baoan District
Shenzhen, China
Phone: QYSMT / MOREL USA CONTACT – SUSANTA TRIPATHY.: 1-912-373-4005 / China Contact: 86-075521635007
