Electronics Forum: spindle and pressure (Page 1 of 8)

Chip placement pressure check.

Electronics Forum | Wed Apr 28 10:29:04 EDT 2004 | dougt

By "placement pressure" I assume you mean force. I don't know of placement machines that have transducers mounted on the placement spindles that actually measure force. We made a board with a force sensor mounted through a hole so that it was the sa

GSM2 and FlexJet heads

Electronics Forum | Sat Oct 10 16:05:27 EDT 2009 | dilogic

I would if someone can share his "real-life" experience with FlexJet (7-spindle) heads. We are currently running machines with Flex heads (4-spindle), which are very easy to maintain, but I suppose 7-spindle has more throughput. All comments are welc

Pick and Place drops nozzles

Electronics Forum | Wed Jul 27 12:50:59 EDT 2005 | mnguyen

You may want to look at which spindle that is dropping the nozzle and check the O-ring on the spindle head. It's probably bad, cracked, or broken. Replace it and that will fix it

tape and reel machine

Electronics Forum | Tue Oct 09 14:10:24 EDT 2001 | cal

I am confused. You are using pressure sensitive tape. the pessure sensitive tape i have seen does not use cover tape.The pressure sensitive tape I am familiar with is called "Surftape" could you provide some more clarification?? Surftape is more co

tape and reel machine

Electronics Forum | Thu Oct 11 13:37:35 EDT 2001 | Stefan

The pressure sensitive tape is used as an alternative to heat sealed cover tape. It works usually quite well and is easily applied by the taping machine, but it can create some problems in the tape feeder. In the Surftape, Cal is referring to, the c

Lead Free and ICT

Electronics Forum | Sat Jun 03 03:35:16 EDT 2006 | mika

Yes we do have a problem with this. We have by now investigate numerous lead/RoHS PCBA:s The RoHS boards are by far the most difficult one's to probe and test. Our people at the "test area" including Flying Probe and ICT they spend a lot of time to t

0402's and Gluing.............

Electronics Forum | Tue Feb 08 23:29:54 EST 2005 | mrduckmann2000

Help! Does anyone know how to get a Camolot Gem II machine to put down dots for 0402 placement? I have been working with Electrovert Tech's that say their machine WILL place dots for 0402's. I have reduce the speed of the pumps to half the speed,

Universal GSM and 0402/0201 Placement

Electronics Forum | Fri Jan 16 15:46:07 EST 2015 | comatose

We did 0402s for years on a GSM. Is this a flexjet or a 4 spindle head? A flexjet is easy with 0402s. The four spindle nozzles are big, you run into issues with knocking already places parts and having to Z zone carefully (and beware repair cycles.)

Universal GSM and 0402/0201 Placement

Electronics Forum | Fri Jan 16 16:57:14 EST 2015 | dilogic

I doubt you will be able to get satisfactory results with 0201. 0402 is another story. When doing 0402 projects, we use only electric (MP) feeders and always at the same feeder slots (feeder teach done for each of them). MPF08 nozzle works fine. Also

Universal GSM and 0402/0201 Placement

Electronics Forum | Mon Jan 19 09:07:45 EST 2015 | cotinc01

We can offer several nozzles to assist with the placement of 0402/0201 components in the four-spindle head. We offer the 06MPF along with custom ceramic tipped nozzles. Most of our standard nozzles for this head type are less than $125.00 each. Chec

  1 2 3 4 5 6 7 8 Next

spindle and pressure searches for Companies, Equipment, Machines, Suppliers & Information

Selective soldering solutions with Jade soldering machine

Component Placement 101 Training Course
Pillarhouse USA for Selective Soldering Needs

High Precision Fluid Dispensers
thru hole soldering and selective soldering needs

High Throughput Reflow Oven
Software for SMT

World's Best Reflow Oven Customizable for Unique Applications


"回流焊炉"