Electronics Forum | Thu Nov 21 11:10:07 EST 2013 | luciano
Hello, We've just started using VIGON A200 in our Aqueous Trident XLD system and observed that aluminium electrolytic capacitors get corroded. Concentration was set at 20% and washing is done by spray at 150F for 6 to 8 minutes. Then is rinsed seve
Electronics Forum | Mon Nov 25 09:45:29 EST 2013 | processman
Are you using zestron corrision inhibiter Ci20 also?
Electronics Forum | Wed Nov 27 06:06:59 EST 2013 | luciano
Electronics Forum | Fri Dec 06 06:02:25 EST 2013 | luciano
Thanks for the advice!
Electronics Forum | Thu Nov 21 12:06:16 EST 2013 | rgduval
The last time I got corroded parts out of my wash was when my DI tanks were spent, and I was pretty much using straight tap water. Refreshing the DI tanks eliminated my issue. Hope this helps. cheers, ..rob
Electronics Forum | Thu Nov 21 12:22:44 EST 2013 | luciano
Thanks for the tip! The DI tanks are brand new. Water quality is pretty good. The filtering is also good and the instrument in the water recycler measures about 12MOhm resistivity. Cheers, Luciano.
Electronics Forum | Tue Nov 26 06:33:09 EST 2013 | luciano
Hi! I haven't found any info about that product. I can't even find it among Zestron products. Could you tell me where to find some info about it? Thanks!
Electronics Forum | Tue Nov 26 08:57:03 EST 2013 | processman
Hi, Its a zestron product which we have used for many years, speak with Zestron and i m sure they will assist.
Electronics Forum | Tue Dec 03 10:22:25 EST 2013 | cpitarys
Insure your rinses are only 25 to 30-seconds each. Also there are options for cleaning solutions from Kyzen that are safer on AL and do not require dosing of any additional inhibitors.
Electronics Forum | Fri Sep 04 02:09:03 EDT 2009 | sachu_70
Hi Walter, Do you refer to a sprayfluxer operation? The problem seems to be a parameter setting issue. 1. Ensure the wide angle spray reaches PCB with optimum jet pressure. You could pass a glass plate to understand flux coverage and view Jet pressur