Electronics Forum | Tue Oct 09 14:10:24 EDT 2001 | cal
I am confused. You are using pressure sensitive tape. the pessure sensitive tape i have seen does not use cover tape.The pressure sensitive tape I am familiar with is called "Surftape" could you provide some more clarification?? Surftape is more co
Electronics Forum | Thu Oct 11 13:37:35 EDT 2001 | Stefan
The pressure sensitive tape is used as an alternative to heat sealed cover tape. It works usually quite well and is easily applied by the taping machine, but it can create some problems in the tape feeder. In the Surftape, Cal is referring to, the c
Electronics Forum | Sat Jun 03 03:35:16 EDT 2006 | mika
Yes we do have a problem with this. We have by now investigate numerous lead/RoHS PCBA:s The RoHS boards are by far the most difficult one's to probe and test. Our people at the "test area" including Flying Probe and ICT they spend a lot of time to t
Electronics Forum | Tue Feb 08 23:29:54 EST 2005 | mrduckmann2000
Help! Does anyone know how to get a Camolot Gem II machine to put down dots for 0402 placement? I have been working with Electrovert Tech's that say their machine WILL place dots for 0402's. I have reduce the speed of the pumps to half the speed,
Electronics Forum | Tue Nov 28 21:16:17 EST 2006 | davef
J Rose at EMPF says: The introduction of no-clean solder fluxes in electronics manufacturing has given rise to greater levels of solder balling simply because the opportunity to remove them in the wash process does not exist. They are typically cause
Electronics Forum | Tue Jul 05 16:29:27 EDT 2005 | stepheniii
The air kiss is to replace the vacuum with air so the part will drop off the nozzle. Every machine I've seen with Air kiss, uses it when discarding a part as well as when placing a part. The air kiss should not be strong enough to blow the nozzle off
Electronics Forum | Wed May 24 17:09:05 EDT 2000 | Chris McDonald
We have A V-Tek using pressure sensitive cover tape but the only success that we have found is with SO-8, S0-14, SO-16 anything wider and the tape pulls apart when on our feeders. ANything over 16 wide is not recommened unless you get a heat sensitiv
Electronics Forum | Mon Dec 20 13:39:08 EST 1999 | Wolfgang Busko
Hi Clarissa, seems to be a real start up situation you are in. For the printing there is IMO no need to buy any sophisticated automatic-vision-alignment-self-cleaning-inline-and-more-machine. Features you need: - adjustable in X-,Y-,Z-axis (individu
Electronics Forum | Tue Sep 18 05:22:34 EDT 2012 | sarason
Try this page for the updated machine An FP-100 about 85 psi. for this model. The basic machines are near identical , just newer plastic moldings. I think I ran mine off a car inner tube and a 12V tyre pump, originally. So that would have been a
Electronics Forum | Mon Jun 19 09:47:23 EDT 2017 | georgetruitt
You have a lot to think about! What does the flux manufacturer recommend as far as specifics like water temp or pressure? Do they recommend high temp di-water a detergent or saponifier? Do you currently have a cleaning machine, batch cleaner or inl
