Electronics Forum | Wed Aug 23 02:03:26 EDT 2017 | vincent1991
hi dear. i'm interest about auto cleaning squeegee and i wanna know , is it really work ? I mean is it possible to clean squeegee with air knife ? thanks .
Electronics Forum | Fri Aug 18 08:23:43 EDT 2017 | pavel_murtishev
Ultrasonic works fine for squeegees.
Electronics Forum | Mon Aug 21 06:17:19 EDT 2017 | v037022
Dear Pavel, Did u use it? Does it need any solution (solvent)? We tested 2 times with water and alcohol but it didn't work. Do u have any idea?
Electronics Forum | Sat Aug 26 09:40:27 EDT 2017 | v037022
Dear, My current method incluce steps below: 1. take out all screw 2. Put them into alcohol 3. Clean it with bemcot paper which wet by alcohol 4. Dry it by air gun 5. Checking by Dino camera. It took so much time. Now i want to do it automatic to red
Electronics Forum | Thu Aug 17 21:56:05 EDT 2017 | v037022
Dear experience members, Now we are using permelex squeegee blade and we do cleaing it after printing 24 hours. Actually, it took very long time to clean. we need to take out one by one screw and use bemcot paper/ alcohol to clean solder remaining on
Electronics Forum | Thu Jun 14 10:50:38 EDT 2001 | Dave G
Are you changing heads because of pastes or just changing widths ? Changing the head w/o cleaning is fairly straight forward. (Actually it's Pretty easy.) We have two widths - 8" & 12". We switch twice a day with very few problems but, we don't have
Electronics Forum | Wed Jun 13 21:25:48 EDT 2001 | dougk
We've tried the MPM rheo., with excellent results. We saw a decrease in fine-pitch pad coverage rejects from ~20% to bacicially ~0%. Print speeds went from 1-2 in/sec (metal blade) to 4-5 in/sec (rheo.). Could probably go faster. Great throughput. Li
Electronics Forum | Wed Jun 13 13:50:49 EDT 2001 | DaveG
I don't have any actual "hard" data to give on improvements but, I can share some experiences with you. What we noticed when we implemented the Rheo pump was: No more solder "skips" on our boards, Improved print quality on our BGA's & 16mil fine pitc
Electronics Forum | Fri May 29 14:22:27 EDT 1998 | Chrys
| Does anyone out there can let me know how to clean a Entek Coating Board if I have a misprint during solder paste printing? According to the guys at Enthone, squeegee most of the paste off, then use Kyzen Lonox (which only removes 3% of the coating
Electronics Forum | Wed Dec 06 10:48:30 EST 2000 | Travis Slaughter
How about a rack, bracket, or something that will let you do squeegee�s and stencils at the same time?
