11 srx autobaud results

Electronics Forum: srx autobaud (Page 1 of 2)

SRX AUTOBAUD

Electronics Forum | Thu Sep 26 10:04:46 EDT 2013 | nophsem

I tested original 'bad' SRX card in the other machine and it doesn't work, same error: SRX Autobaud Motor error #5 With our QUAD 4C, (Machine speed setting) MC 53= 0 (high speed), I changed =1 (low speed), same error

SRX AUTOBAUD

Electronics Forum | Tue Sep 24 18:10:39 EDT 2013 | nophsem

Hi! During the operation there were random errors, mainly motor error #4, but I could continue with the production, and finally I restarted the machine and immediately appears: SRX AUTOBAUD Engine error # 5 I would appreciate your help. Thank you.

SRX AUTOBAUD

Electronics Forum | Wed Sep 25 13:58:09 EDT 2013 | nophsem

bobpan: I replaced SRX board (head #1) with SRX board (head #2) and... it works!!!

SRX AUTOBAUD

Electronics Forum | Wed Sep 25 14:17:29 EDT 2013 | bobpan

Good Job!!! Now fix the bad one.....haha

SRX AUTOBAUD

Electronics Forum | Wed Sep 25 16:08:47 EDT 2013 | nophsem

The game doesn't end, bobpan! When I changed SRX boards, turn on the machine and doesn't indicates Motor error #5 and head initialize at home. I upload a program, I put the PCB to start, then RUN and head stay paralyzed halfway between HOME and PCB,

SRX AUTOBAUD

Electronics Forum | Thu Sep 26 05:23:51 EDT 2013 | bobpan

Does the original 'bad' SRX card work in the other machine? If so....then both boards are good and you have another problem. I would go through the list i posted above on motor error 4 problems. I would suspect a ribbon cable or motor/motor cable at

SRX AUTOBAUD

Electronics Forum | Thu Sep 26 10:11:10 EDT 2013 | bobpan

Last try for me....... Did you put in your mod codes after it homed? I can help you further at my e-mail address.......go to: www.precision-repairs.com You can then send me a personal e-mail. good luck

SRX AUTOBAUD

Electronics Forum | Wed Oct 02 23:25:05 EDT 2013 | marcelorotofrance

Jorge: Si necesitás probar alguna placa en nuestra máquina avisame. Preguntale a Gruber si tiene alguna placa extra. Que tengas más que suerte. Marcelo.

SRX AUTOBAUD

Electronics Forum | Wed Sep 25 13:39:11 EDT 2013 | bobpan

I have rarely seen a bad SRX controller card but it sounds like you may have a faulty card. Since i know you have 2 machines...i would swap them....make sure you take a picture of it or write down where all the cables plug in. The SRX board is locate

SRX AUTOBAUD

Electronics Forum | Wed Sep 25 13:25:13 EDT 2013 | nophsem

Hello bobpan: The machine is a QUAD 4C I turn on the machine and get the error: SRX AUTOBAUD Motor error #5 I removed the battery and then put it back in, the error remains. I removed the battery without put it back in...and turn on the machine,

  1 2 Next

srx autobaud searches for Companies, Equipment, Machines, Suppliers & Information

Best SMT Reflow Oven

High Resolution Fast Speed Industrial Cameras.
XTECH AUCTIONS

PCB Assembly Supplies - ONLINE STORE
Voidless Reflow Soldering

One-stop Platform For All Your Need For SMT - QYSMT


MIRTEC - the Global Leader in PCB INSPECTION Technology.