Electronics Forum: stop and alarms (Page 1 of 12)

cp45fv-neo Emergency stop

Electronics Forum | Mon Aug 31 11:52:28 EDT 2020 | inspiredmorris20

Hello Jon, I appreciate your reply, correct there are 2 red (24v) that control the main power and 2 blue (they control the power to the units operation keys ready, start, stop, reset, change feeders.) additionally there is a red jumper wire on the E

cp45fv-neo Emergency stop

Electronics Forum | Fri Aug 28 17:47:59 EDT 2020 | inspiredmorris20

thanks Stephen!! I'm testing for voltage and have found 24v going through the E-stop to the main switch. If i trip the E-stop i can disengage the main switch. I have no more control to the hardware then that. The software is not throwing any code ot

CP4 jerks all axis after power up and reset sw...

Electronics Forum | Tue Apr 17 13:07:17 EDT 2012 | rodrigo

Well... after much headache I found a bad relay contact in M1CR1E. The good news is somehow the axis are no longer jerking. The bad news is that it still does not work. When I turn it on now it shows this: emergency stop (in red) waiting for reset

PCB Storage and FIFO

Electronics Forum | Tue Sep 23 14:29:34 EDT 2008 | realchunks

I have shlves with rollers and a stop on one end. Boxes go in one end and roll towards the other. One end for people to pull from, the other is to load. I have bunch left over and willing to sell cheap. Let me know if you want them.

MPM Up2000 and SMEMA

Electronics Forum | Wed Sep 14 23:30:30 EDT 2016 | ariss_t

Hi, my 2cent.. u could try to check the sensibility of the camera board stop sensor.. maybe it detect something i.e support block.. do reply when u found the actual root cause.. thanks..

Humidity and temperature

Electronics Forum | Wed Sep 14 04:09:21 EDT 2016 | jimmyh

We are enclosing our SMT room and will control the Humidity and Temperature of the room. Is there a standard for humidity and temperature for a SMT room and if so what is it. What is protocol if it goes out of tolerance? Do we stop production? Is

Pre- and post-reflow rework

Electronics Forum | Fri Feb 11 19:07:16 EST 2005 | primus

We are also looking for AOI machines, pre- and post-reflow. We already tried one machine from the UK (I don't remember the name, I perfer to forget we ever had it) and they told is it would do everything we wanted. Maybe so, but not well enough. It s

QSoft2 and Sound output

Electronics Forum | Sat Jun 14 09:28:27 EDT 2008 | torch

im currently trying to get the audio responses working with QSoft2 as our machine didnt come with a soundcard ive managed to find an old ISA card and get it installed. its a creative soundblaster so quite a well known brand and easy to install, win98

Pick and place labels

Electronics Forum | Fri Sep 24 12:02:57 EDT 2004 | Frank

Yes, I can see your problem, the nozzle makes only good contact in the center and so the ends don't make good contact. The ends tend to curl up during reflow. There were two suggestions to solve this. 1) Let the operator push down the labels befor

Touch-up and Inspection Process

Electronics Forum | Wed Mar 02 18:46:02 EST 2005 | Austinj

The tendancy always has been "when in doubt, touch it up"... this is not the way to "verify the process" and is not the best strategy for multiple reasons (unessecary rework, additional labor costs, as well as making the solder joint more brittle, [i

  1 2 3 4 5 6 7 8 9 10 Next

stop and alarms searches for Companies, Equipment, Machines, Suppliers & Information

See Your 2024 IPC Certification Training Schedule for Eptac

Reflow Soldering 101 Training Course
PCB Handling Machine with CE

Stencil Printing 101 Training Course
2024 Eptac IPC Certification Training Schedule

World's Best Reflow Oven Customizable for Unique Applications