Electronics Forum: stripping (Page 1 of 44)

Smt parts in strips

Electronics Forum | Wed May 09 09:18:09 EDT 2012 | tbouslog

I was wondering if you could tell me about how long it takes to load and teach the strips in the tray?

How to cut LED panels to Strips and join them together to make 23 ft LED light strips

Electronics Forum | Thu May 01 23:32:46 EDT 2014 | asajedi

I have assembled panels of 24"X9.5" LED Panels (24 strips of 10mm). I need to cut them into strips and join them together then add double sided 3M tape and spool them. How is this best accomplished. Laser Cutting, Die Cutting, Roller Cutting

Juki & Cut Tape

Electronics Forum | Fri Dec 15 20:12:13 EST 2006 | Frank

The strip tape tray feeder is not practical if you have a lot of different strips. What about using splicing? Take some empty tape and splice it on to the front of your strips?

Programming the Camalot

Electronics Forum | Thu Aug 28 09:45:48 EDT 2008 | leemeyer

What is the model of the machine, 1414, 1818 ?? What version of software are you running. There is probably a safety touch strip (yellow rubber strip)that is around the head and possibly the front sides of the machine. Check the connections and wirin

Avoid mixup reels unloading in Siplace

Electronics Forum | Thu Jul 04 05:24:45 EDT 2019 | kasun_elk

We have some small strips of SMD reels, when we use those reels in Siplace machine we can't identify exact part number of the strips because there is no any connection with reel and the strip. And while unloading reels operators insert wrong art

Comformal Coating Stripper

Electronics Forum | Thu Feb 28 21:01:09 EST 2008 | davef

Tony: Thanks posting information about your experience with strippers. First, why did you need to strip the entire board? Next, please clarify the following points to expand our knowledge of using Humiseal 1063 Stripper: * How long was the conforma

Wire prep

Electronics Forum | Mon Aug 27 12:42:47 EDT 2007 | rgduval

I know this is a little outside of SMT production, but, I'm hoping someone out there can help me with a small issue. I have a product that I'm building that requires 4 .250" wires, with .125" strip on each end. I solder one end to the board, and on

Smt parts in strips

Electronics Forum | Wed May 09 17:49:16 EDT 2012 | dyoungquist

We run a Mydata high mix, low volume line. You can handle strips with either the Agilis feeders (losing the first 5-10 parts) or by placing the strip on the Y or tray wagons. For cheap parts like resistors, capacitors, some diodes and small ICs, ou

Solder Robbing Pads

Electronics Forum | Wed Jul 03 14:34:45 EDT 2002 | razorsek

Jeff, what I generally use as a rule of thumb on multi-row connectors was a strip on the trailing side of the connector as it flows through the wave. The strip was always the same width as the diameter of your through-hole. The distance of the stri

APEX Venue!!

Electronics Forum | Wed Jan 24 13:10:18 EST 2007 | Cal

Harah's on the strip is $59

  1 2 3 4 5 6 7 8 9 10 Next

stripping searches for Companies, Equipment, Machines, Suppliers & Information

Electronics Equipment Consignment

World Source Equipment: Used equipment sale. Hundreds of items on sale.
Best SMT Reflow Oven

Component Placement 101 Training Course
PCB Handling Machine with CE

Stencil Printing 101 Training Course
one-stop for smt solution

Find a wide selection of nozzles, solder materials, storage solutions and more at SALESCON