Electronics Forum | Fri Apr 02 15:59:04 EST 2004 | russ
Matt, are you still just doing SIPAD? If so, Manncorp has a profiler for about $1k It requires a p.c. to be hooked up while profiling and it won't take data points any faster than 1 point every 2 seconds. but could be adequate for your needs. (www.
Electronics Forum | Fri Apr 02 11:23:44 EST 2004 | pjc
ECD has some advantages in terms of upgrade path. Once you buy the ECD SuperM.O.L.E., you can use it in a OvenRIDER, WaveRIDER and ReworkRIDER products. The OR, WR and RR are solder machine management devices for solder process control. Where profile
Electronics Forum | Fri May 02 11:11:49 EDT 2008 | lon_sanders
The cable required for the Thinline has to work as a true RS232 interface as the unit uses all the capabilities of RS232. You will have several problems with substitutes. These cables (part number e00-2787-26) are still avaliable from ECD, the home o
Electronics Forum | Mon Apr 21 23:08:03 EDT 2008 | dman97
Hi, Does anyone know what kind of cable the thinline profiler uses? I recently acquired one of these profilers, but it came with no cables. I went out and bought a female to female serial cable, but it did not work. It will not communicate with my P
Electronics Forum | Fri Apr 25 13:40:37 EDT 2008 | flipit
If you know a little about electronics, you can probably figure it out. Or just buy one from Mole. Do you have software? More than likely you will have receive, ground, and transmit. Open up the Mole if you can and look for the RS232 chips(Max232
Electronics Forum | Wed Aug 18 08:32:20 EDT 2004 | Santech
If anyone is interested, I have a brand new Super M.O.L.E. Thinline that I am looking to sell. It includes the case and all the software and hardware originally with. It has been used 1 time. Brian 336-337-0333
Electronics Forum | Fri Mar 05 12:25:02 EST 2010 | leemeyer
Hi all I have an opportunity to purchase a lightly used Super M.O.L.E Gold profiler along with the Auto Mole Xpert oven setup package. Can I get some opinions on how well the predictor and oven setup works. Also is the software user friendly? I would
Electronics Forum | Sat Nov 03 05:19:59 EST 2001 | Ben
Hi I have question about thermocouple type use for Super M.O.L.E. I found in some article that type K T/C (Nickel-Chromium vs. Nickel-Aluminum) may suffer from temperature cycling hysteresis at above 250 degree C and also diffecult to solder. Now
Electronics Forum | Tue Jul 30 18:26:38 EDT 2002 | burb1999
MYDATA MY12 for the pick and place
Electronics Forum | Wed Sep 22 15:01:05 EDT 2004 | Hayden
Thank you for the help