Electronics Forum | Thu Dec 09 15:03:39 EST 1999 | Andy Yates
I would suggest that as well as repeatedly inspecting the same board and looking at the standard deviations of the measurements, you should perform some form of accuracy test either by measuring a known glass plate or by inspecting a board at 0 and 1
Electronics Forum | Fri Dec 03 15:38:13 EST 1999 | DaveH
Jason, Something which has not been addressed in the responses so far is the system which utilizes high volume (flow rate of chemistry over the product), versus high pressure, which indeed has the potential to damage very fine webs on fine pitch sten
Electronics Forum | Tue Nov 23 15:37:30 EST 1999 | Rob Horowitz
Give Contact Systems a call. A standard Contact machine will fit boards as large as 26" x 18", and place parts at a rate of 13,000 CPH. They have both new and refurbished machines to fit within your budget. I would certainly not recommend going less
Electronics Forum | Fri Nov 12 07:42:38 EST 1999 | Michael
We are looking for AOI for post solder inspection with short setup times for high mix assembly. Also the solder joint of J-Lead components should be inspected. We found two suppliers for such systems, Orbotech and Viscom. Can anyone help us to det
Electronics Forum | Thu Oct 28 18:35:58 EDT 1999 | Dave L
JohnJ, Contact Amistar Corporation to find out more about the DataPlace 100LP. I've personally seen it, and other competing machines, in action in production environments...unlike the others, it is a FAST, extremely reliable, well-engineered, and fle
Electronics Forum | Mon Oct 18 13:50:18 EDT 1999 | Jeff Ferry
Barb, You can contact Circuit Technology Center. This company offers BGA rework services and BGA X-ray services using a Nicolet X-ray system. You can get a little more info from web site http://www.circuitnet.com/catalog/remove1.htm Jeff Ferry
Electronics Forum | Wed Oct 13 12:07:43 EDT 1999 | mikeh
Hi, I am currently using a peelable mask prior to wave soldering and have started exploring water soluble/washable masks. The mask will be used with water based and alcohol based flux. Are there any compatability issues to concider and how will this
Electronics Forum | Tue Oct 12 11:03:10 EDT 1999 | Mika Johnsson
| Just curious as to everyones thoughts on if you could chose to use F4G or an MCS-30. Which would you chose and why? | | | Larry J | | If you need connections to other systems (CAD,MRP,Optimization) then I think MCS coul be a better choice, s
Electronics Forum | Thu Oct 14 10:50:51 EDT 1999 | Tony
Carl, The software is available from Fuji America as well. To determine the kit you will require for the upgrade, you need to know what size hard drive you have in your system and then visit the FAC web page for a part number and pricing. http://w
Electronics Forum | Fri Nov 10 09:51:22 EST 2000 | Peter Loten
Chris thanks for saying nice things about Diagnosys AOI systems.There is also another way of looking for Manufacturing Defects for about the same price - �30K/40K. Single Point Flying Probe using Impedence Analysis techniques is really taking off her
