Electronics Forum | Sun Dec 02 19:30:09 EST 2012 | rgduval
It'll be a DI system. As it turns out, we contacted another EMS company down here, and asked them what they did. They pointed us to their supplier. Conveniently, the same company will set up the DI system for us, and the post wash filtering/plum
Electronics Forum | Wed Dec 18 15:58:25 EST 2019 | majelacquinn
I am looking for recommendations for a table top reflow system that can do lead and lead free solder. Has anyone tried the SMT-2011 Desktop system sold by SMT max? Any of the manncorp/LPKF systems ect?
Electronics Forum | Mon Jun 18 11:34:00 EDT 2001 | Gil Zweig
As you probably have discovered, the cost of x-ray inspection systems can run anywhere from $35,000 to $350,000 or more depending on if you want an In-line or off-line system. Assuming ,in your facility, you want an off line system, then the next con
Electronics Forum | Thu Sep 20 13:28:23 EDT 2001 | ohanlon
Here is how the FormFlex system conforms to component variations. The FormFlex system utilizes an oil chamber that is common to ALL the pins once the system is set. Pushing down one pin will cause the displaced oil to be shared by all the others pins
Electronics Forum | Wed Dec 08 08:20:20 EST 1999 | Jerry Stafford
Michael, You need to know the measurement capability of whatever system you use to do your CpK measurement. Ideally you would do an error of measurement study of the measurement process. It is hard to imagine a measurement system that would err on
Electronics Forum | Sun Mar 02 21:33:58 EST 2003 | caldon
I like the Idea of supporting the PCB during assembly but do not know if I am sold on TA system of doing such. The TA system does not lend it self well to any Engineering changes. The concept is sound but feel the system from Airline Hydraulics is a
Electronics Forum | Thu Jun 19 16:58:11 EDT 2003 | blundell
We can speak from experience, the Ersascope needs only 1.5mm to see along side a device and is the only system that looks low enough, the cheaper systems may be fine for normal packages but forget it for csp's, micro BGA's Also its the only system th
Electronics Forum | Wed Sep 01 16:16:17 EDT 2004 | DenisM
Hi, I have used these type systems in the past and had trouble with white residue and flux removal under low standoff components. All cleaning systems need DI water and this requirement adds another layer of system cost if you don't have DI availabl
Electronics Forum | Mon Feb 27 20:17:54 EST 2006 | SJ
Could anyone kindly share any good/bad experiences that they have with their MRP / ERP systems in a small-mid size contract manufacturer environment? We've been using DBA Classic but is looking for a more scalable, robust system. Our main concern i
Electronics Forum | Tue Mar 06 08:33:40 EST 2007 | cardinal
You can get a topside edge-clamping system to fit your AP HI E printer from Gridlok. They make a universal tooling system and topside edgeclamping system for the AP series and UP 2000 series printers. The Y snugger tooling option when ordered with t