Electronics Forum | Wed Dec 05 22:59:42 EST 2007 | er_pe
To be successful, and to yield quality products off any selective solder systems out there on the market today, DFX rules need to be enforced and followed. Lay-out is a one-shot process where as manufacturing of the PCBA is continuous. Obviously, muc
Electronics Forum | Tue May 13 08:41:41 EDT 2008 | fishingfool
Loco, My thoughts are that your market may be fairly limited. There are people and companies out there that can use low cost equipment. However, with your limitations of support you are basically asking an owner of a small company to output 11-15
Electronics Forum | Tue Jul 15 01:02:37 EDT 2008 | grayman
Hi Ck, Good engineers would dream of and want to have big salaries, car plan and others and I believed only technical managers or managers would get. Though, I have not yet visited USA but I know you have the same business system as ours. We, Filipin
Electronics Forum | Thu Oct 30 05:05:08 EDT 2008 | allgood
I havent used it yet but I do find myself keep coming back to it - I have been searching for a decent ERP system for my micro company for years. What I like about it is the way you can export and import just about any data which we need to do as our
Electronics Forum | Tue Nov 25 11:58:31 EST 2008 | rway
Hello all, We are using z1850/60 machines. The APC test is damaging a 1.8V device on the board. The APC stimulates -/+3Vdc in fast mode. I understand the dangers of over-voltage. But what I need to know is how the part is being damaged when the ent
Electronics Forum | Mon Feb 02 15:25:44 EST 2009 | fishingfool
muarty, Each has their place. Rules based systems (algorithm) are harder to program and I have seen post on here with people saying there is no real difference in defect detection. Image based systems are much easier and intutitive to program.
Electronics Forum | Wed Jun 10 22:31:07 EDT 2009 | mgcoope
At work we use a system in which every customer uses a part with a phantom ( top level ) part and then under that we have more part numbers that are valid. So something like a surface mount resistor would be stored as something like. PPPPPPPPPPPP
Electronics Forum | Fri Feb 26 14:36:58 EST 2010 | gregp
Hi Dave, The short answer is "it doesn't". The mascot is simply a light guided assembly system. The major difference is the CS-400E machine has the fully programmable cut and clinch unit doing it's thing under the board while it is being assembled.
Electronics Forum | Fri May 07 23:43:10 EDT 2010 | jlawson
I assume you using a fixed mass vapour phase system? Yes rates of rise are impacted by the mass of the PCB, larger the mass to mass of vapour phase the lower the rise generally. So if you load the machine with very little mass PCB rise times can be
Electronics Forum | Wed Oct 13 06:20:00 EDT 2010 | costache
Dear All > > I need to check the solder paste > volume inside the PTH at our board,which size is > 440x620 mm.So, I may need 3D inspection > machine,AXI, not AOI.So, does anyone recommand me > which 3D machine is suited to my PCB? Thanks in > a
