Electronics Forum | Wed Jan 23 20:11:14 EST 2008 | davef
In previous threads, similar to this here on SMTnet, varies folk have made recommendations, as follows. Fixed position (mounted) [In-line] laser bar code scanners: * microscan 800-762-1149 info@microscan.com [Ken SMTnet] * symbol technologies symbol.
Electronics Forum | Mon Jan 28 15:34:19 EST 2008 | slthomas
I have used the ECD MOLE and had no complaints. I also checked out a Datapaq at one time and really liked the software but it was a little on the spendy side. ECD provides free upgrades to their software which does provide some fairly helpful pred
Electronics Forum | Tue Feb 19 16:26:51 EST 2008 | edatasys
Check out http://www.solderstar.com They have 4 , 6 , 9 or 12 channel products. Software is user friendly and contains predefined specs. for solder paste & reflow ovens. Makes setup quick & easy, also has simulation tools to quickly optimize profile
Electronics Forum | Wed Jan 30 10:21:36 EST 2008 | jax
Haven't used Quad in a long time but here is what I have in my system for that item: Precision Placement Machines, Inc. (Fremont, NH) Part # 5-1567-025-5 Price $1750.00 Contact Info: Phone # 603-895-5112 Quad will charge around $2750.00
Electronics Forum | Thu Jan 31 09:00:15 EST 2008 | d0min0
Hi, we have 4 DEK 265 infinity, all with blue underscreen cleaner (with paper rolls), it doesn't make miracles :) but if you have good solvant system (not too much - you flood the paper and not too small) then works OK on some of our DEKs (y 2000) t
Electronics Forum | Thu Jan 31 13:55:10 EST 2008 | slthomas
My first thought is that your roof exhaust blower is dead and that these boards are the only no-clean boards you build but that's probably not the case. To start from the beginning, though, are all of your blowers operating normally (in the oven an
Electronics Forum | Tue Feb 19 14:52:04 EST 2008 | dphilbrick
You also need to understand when using something like a Q Cutter you should resolder the board after you cut! Your alternative is to get someting that when you put your part in it cuts and clinces the part. Contact Systems makes machines that present
Electronics Forum | Tue Feb 26 15:20:12 EST 2008 | schorschimi
The german machines use the same basic procedure as the Compact Systems CS-400E but (to my knowledge) no cut and clinch. Can you give any information about manual visual inspection after stuffing boards with such machine. If stuffing boards without
Electronics Forum | Fri Mar 14 17:41:32 EDT 2008 | jerrysaise
Hello Before I say anything. Here is one caveat, I work for a 3D paste inspection vendor, I will not mention which. So you can take whatever I say with a grain of salt. Paste inspection will make a difference if you want to put the effort into it ma
Electronics Forum | Tue Mar 18 14:13:27 EDT 2008 | chrisgriffin
I know for a fact that you do not need a new computer. Speedline likes to say that about everything. I can have a broken sensor and they say I need a computer upgrade. Their tech. support people tend to be salesmen at times. You just need a newer
