Electronics Forum | Mon Sep 16 13:29:37 EDT 2013 | larrygroves
a lot depends on the age and type of equipment you are using . Older equipment can have a lot of problems with smaller parts. If all is well with your feeders and machine you should expect something like 99.8 to 99.9 percent. some parts will be ident
Electronics Forum | Wed Sep 25 16:01:17 EDT 2013 | action_101
We have the thermal connections on our omniflow, but we prefer to use the mole. I actually prefer the kic profiler over the mole profiler, but you work with what you have sometimes. The benefit of using an external system is you don't have the long t
Electronics Forum | Thu Nov 21 11:10:07 EST 2013 | luciano
Hello, We've just started using VIGON A200 in our Aqueous Trident XLD system and observed that aluminium electrolytic capacitors get corroded. Concentration was set at 20% and washing is done by spray at 150F for 6 to 8 minutes. Then is rinsed seve
Electronics Forum | Wed Dec 04 16:35:54 EST 2013 | martingruber
I am facing the following problem: Powering up the machine the start sequence stops with following message: Inizializing Hardware .... Reading SRAM data .... Inizializing MEI Motion Bd .... Mei bd. @ 240 # Dev. Version 2.4g2 Option 41 DSP BOOT MEMORY
Electronics Forum | Fri Dec 13 11:28:47 EST 2013 | island2013
I've used the DEK Vector Guard system in the past. We had three of them and we did alot of change overs. They held up really well and our stencil storage went from rack upon rack upon rack to a very small space. It was worth the money and the perf
Electronics Forum | Wed Dec 18 22:41:36 EST 2013 | dekhead
You don't say what software version is running on machine; generally caused by corrupted file; delete E: config local.lpf file and then reboot machine (new file will be created). If not this, recommend reload of machine software (should not require s
Electronics Forum | Thu Dec 19 08:26:19 EST 2013 | dekhead
Are both machines running the same type of computer (Advantech Computer w/P3 1G CPU probable)? if not possible problem with system software incompatibility. Contact me directly, I may be able to assist. www.dekhead.com
Electronics Forum | Wed Mar 12 04:19:29 EDT 2014 | beneyhan
Hi, Mi. it is some Gerber file from PCB/CAD data. u can not open and enter these Lib. data, you maybe get it from the Unicam/Gere Cam supplier BOM data files. hope you can know it. and you must enter this data/Gerber file into the cp65 system prepare
Electronics Forum | Thu Mar 27 07:56:04 EDT 2014 | rrosera
My company is researching the use of re-workable underfill for use on our avionics boards. We are currently testing Hysol UF3810. The Rework machine we use has a vacuum based removal system witch isn't strong enough to overcome the underfill. We have
Electronics Forum | Wed Apr 02 05:31:45 EDT 2014 | jdumont
We have four or five of these guys scattered around our 40,000sqft plant spraying DI water. They have a not so accurate built in humidistat but its good enough and they aren't that expensive for upfront cost. Just lube the packing washers in the gun