Electronics Forum | Mon Mar 21 21:28:41 EST 2005 | pmd
I agree with dave. Two things prevent oders from drains. The "P" trap and the celing or roof vent. If the system is sealed from the pump on then it should run thru a "P" trap this prevents vapors from comeing back thru the pipe. To make sure suction
Electronics Forum | Mon Apr 18 09:52:36 EDT 2005 | pjc
FormFlex and the GridLok system will not work on a semi-automatic printer. They were designed for fully automatic machines. The print table is very shallow on the DEK 248, SMTechs and MPM SPM, UP100 and MicroFlex. DEK should have magnetic base suppor
Electronics Forum | Mon Apr 18 13:38:13 EDT 2005 | davef
IC tubes plastic * ITW Electronic Component Packaging Systems 2001 E Randol Mill Rd., Suite 117, Arlington, TX 76011-3453 817.277.5004fax3453 * Antistatic Industries, 130 Gamewell St PO Box 460 Hackensack, NJ 07602-0460 201.489.4400 fax 7654 * Perfec
Electronics Forum | Tue Jun 14 10:48:03 EDT 2005 | Paul
We evaluated several machines a couple of years ago and ended up selecting an Agilent SJ50. Fast machine but very limited on joint inspection. Also does not detect missing components reliably which you would normally take as a given on an AOI system.
Electronics Forum | Sat May 21 07:23:38 EDT 2005 | ajaydoshi
We do face problem in CP643E, - Vision system alarm & later machine require to turn off. This problem ocurrs once in a week ( average ) Checked up Fuji along with trace data but could not able to get any solotion. Any recommondation. ajay doshi
Electronics Forum | Tue May 31 10:09:17 EDT 2005 | gregp
I am a supplier of flexible pick and place equipment, not a end user. Your question is about new pick and place machines with high feeder capacity and SMT lines with redundancy. That is exactly what the C5 Placement machine from Contact Systems is.
Electronics Forum | Wed Jun 15 14:57:08 EDT 2005 | Ervy
Siemens has an excellent reporting system. If you are running on Siplace Pro you can easily export the pick data and performance data to anaylize. If funds aren't an issue, look into the Siemens Explorer software, this will provide you with data,
Electronics Forum | Mon Jun 13 04:26:00 EDT 2005 | Joris Groot koerkamp
For the lead free reflow process we tested with our Vitronics 500smr oven. To reach the high temperature of the lead free profile was no problem. We are not using an active cooling system so the pcb's are maby to hot wen the leaving the oven. Can an
Electronics Forum | Thu Jun 23 13:43:29 EDT 2005 | Stefan
I fear your files are not stored in the default directory or your hard drive is full. Boot with a DOS boot disc and check your C drive for program and fiducial information. Try an older program to check if the program structure and vision informatio
Electronics Forum | Thu Jun 23 10:49:46 EDT 2005 | slthomas
Your HVAC contractor is probably the guy to talk to (they can hook you up with a variety of air handling and filtration systems depending on the level of cleanliness you want). Another thing you can do is reduce the amount of dust you bring in and/
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Manufacturer / Consultant / Service Provider
3240 Scott Blvd
Santa Clara, CA USA
Phone: +1 408 980 0400