Electronics Forum | Thu Sep 15 17:44:15 EDT 2022 | decaire
I agree with Evtimov that sticking with the J-Std-033 is preferable to creating your own procedure at a different temp, especially if you need to pass an audit since the auditors will compare your process to the J-Std. My understanding is that oxida
Electronics Forum | Thu Jan 05 14:04:44 EST 2023 | unisoft
>> The Unisoft ProntoPLACE software ( https://www.unisoft-cim.com/pcbplace.php ) creates programs from CAD or Gerber or XY rotation and BOM files for setup of SMT Pick & Place, thru-hole, manusert & dispensing machines, and includes the basic feature
Electronics Forum | Tue Jan 31 18:50:01 EST 2023 | markhoch
You might want to look into the Vorne XL Productivity Appliance. You connect it to your line by connecting it to a sensor that will trigger an input. (I used the exit sensor on the pre-reflow conveyor). It's probably the most cost effective productiv
Electronics Forum | Tue Mar 07 17:00:39 EST 2023 | proceng1
Prior to the Generators, we bought tanks of N2. As long as you have an air compressor that can supply the generator, it's pretty much maintenance free. You change filters every year. In almost 15 years, other than changing filters, we've had to r
Electronics Forum | Fri Mar 24 05:07:03 EDT 2023 | smtusa
On average year how much problems did you have with mychronic? They have some features that are appealing to me that other manufacturers don't do: front feeder loading system, fit through a 36" door, no air compressor make it desirable for offi
Electronics Forum | Tue Apr 25 13:05:19 EDT 2023 | proceng1
Occasionally we need to verify that the part in my hand is the MPN it is supposed to be. Or I need to figure out what a part is because the part number label is damaged. I had been using smdmark (dot) com with some success, but it appears to be down
Electronics Forum | Wed May 10 01:40:26 EDT 2023 | gwideman
UPDATE: By some miracle, a paper manual has been found for the ERSAsoft 2.1 software. Turns out that the default user and password are "System". So in addition to that gem, I guess an additional contribution of this thread is that despite the manu
Electronics Forum | Wed Aug 09 12:11:44 EDT 2023 | thecolonel97
We are currently experiencing an issue with one of our reflow ovens producing large amounts of flux crystals in the end of zone 12 and entrance of cooling zone. This has been going on for roughly around 4 years now, we are using Senju M705 lead free
Electronics Forum | Thu Sep 28 16:25:20 EDT 2023 | SMTA-72837649
I've been looking for information on how, if at all, any of you treat water after a pcb batch wash. In particular, we have a Trident LD machine, using Zestron cleaning chemical. We have a carbon tank and two mixed bed media tanks as well as two 5 mic
Electronics Forum | Tue Oct 17 03:04:22 EDT 2023 | ttheis
We don't program machines with OEM/supplier part numbers, we use an "internal" or company part number that we assign for each unique part. This internal part number can have multiple OEM part numbers (primary and alternates) associated with it depend
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Manufacturer / Consultant / Service Provider
3240 Scott Blvd
Santa Clara, CA USA
Phone: +1 408 980 0400