Electronics Forum | Fri Jan 15 09:55:58 EST 2016 | dyoungquist
Mycronic (Mydata) makes a solution for this. Product name is Tape Seal 8 or Tape Seal 1216 Tape Seal 8 - Part No: L-014-1600 Tape Seal 1216 - Part No: L-014-1572 I have used them and they work well.
Electronics Forum | Wed Feb 15 14:03:25 EST 2006 | samir
Robert McKeown Company makes thermally conduct Al tape. KIC did a study on which method (Kapton Tape, Aluminum Tape, Hi-Temp Solder) is the most repeatable. The study can be found in their website: http://www.kicthermal.com Al Tape placed 2nd, and
Electronics Forum | Thu Feb 16 04:25:49 EST 2006 | pavel_murtishev
Good afternoon, Readings from thermocouple fixed by kapton tape only are inaccurate. This is the fact. At least you need to fix thermocouple with aluminum tape covered by kapton tape. Pete C is right. High temperature solder connection is a preferre
Electronics Forum | Thu Jan 14 15:44:20 EST 2016 | sssvajunas
Hello, after we finish project (mydata) we unload tape from feeder and place a stick on the edge of tape. Maybe somebody can help with alternatives to this? (plastic clips) becouse then unloaded tape is used for another project it is sticky
Electronics Forum | Tue Sep 28 11:38:22 EDT 2004 | jsloot
Can anyone recommend a manufacturer in Canada for SMT tape splicing tools? Thanks
Electronics Forum | Thu Jan 22 11:58:32 EST 2009 | davef
Brian: Does green painters tape present ESD issues? What does your field meter show?
Electronics Forum | Thu Feb 26 17:42:12 EST 2009 | ksrsr
We use tape and dots from Advanced Technology Supply. Website - http://www.ats24.com
Electronics Forum | Thu Jan 22 03:25:26 EST 2009 | stevewilde
What masking tape can people recommend for masking the board when conformal coating. I am using a PVA autocoat machine and humiseal 1B31. Current tape, is leaving residue on board when used to hold link wires down whilst glue cures and also when used
Electronics Forum | Thu Jan 22 08:51:07 EST 2009 | mefloump
We use green painters masking tape. Comes off easy and doesn't leave a residue. The blue colored masking tape works well also but tears too easily. Ours runs through and IR oven to cure the coating after it runs in our PVA650 and we have not seen and
Electronics Forum | Thu Mar 05 17:49:57 EST 2009 | snsmt
i have been looking for masking tape as well. I just came across esdtapes.com and got a sample of one of there tapes "CM300." I tested a component by taping it completely off and submerging it in water, just to see if it will soak through. The resu
