Electronics Forum | Thu Mar 05 17:49:57 EST 2009 | snsmt
i have been looking for masking tape as well. I just came across esdtapes.com and got a sample of one of there tapes "CM300." I tested a component by taping it completely off and submerging it in water, just to see if it will soak through. The resu
Electronics Forum | Wed Apr 23 10:51:09 EDT 2008 | ap
has anyone come across labelling of SMT carrier tapes? we test devices in a automated handler, but get some customers asking if we can apply numbered labels to the tape to identify the device, ie one label per device. This seems a bit crazy as the s
Electronics Forum | Tue Oct 25 22:44:20 EDT 2005 | KEN
I guess I would rather spend my time demonstrating why a 20K machine can't do its job and how it is really costing the company money. Maybe its unfair to blame the machine. Often the problem is the team surrounding the machine. Poor maintenance,
Electronics Forum | Thu Dec 15 06:20:11 EST 2005 | rlackey
Hi Liza, We've seen it occaisionally in house on Universal GSM 8,12,16mm but not on Fuji (except when a feeder's not used for a while). Also on 44, 56 & 72mm (the smaller vol parts I mentioned earlier. It tends not to affect the Hoover Davis Feeder
Electronics Forum | Fri Dec 16 10:25:14 EST 2005 | GS
Hi Liza - polystirene monolayer (blend ?) could be sealed at less presure, ie 35-40 PSI. Temprature could be 165�-170�C. For sure after sealed you shoud make sure the sealing strength (peel strength)should meet min 15-25 N.(bet avg from 25 to 45 N)
Electronics Forum | Thu Apr 13 13:38:29 EDT 2006 | smdtapesplice.com
We have the perfect SMD Tape Splice solution that runs flawless through your pick and place machine. Our splices run through Fuji, Panasonic, Siemens, Juki, Universal, Quad/Tyco, Samsung, Sanyo, Mydata etc.. We have a loan program for testing our T
Electronics Forum | Tue May 09 10:53:36 EDT 2006 | Tapesplice.com
Sierra Electronics can provide leader tape samples to any one that want to test. We can provide enough for testing at NO cost. We also have a Tape Splicer loan program that allows you to test ALL our Tape Splicing Products and lets you make the dec
Electronics Forum | Tue Aug 01 16:18:59 EDT 2017 | dleeper
A quick and dirty test; Take a few inches of carrier tape, peel off the cover, gently turn it upside down and see if any of the parts stay in the tape. If they do, then you know there's an issue with the tape.
Electronics Forum | Wed Aug 02 05:27:00 EDT 2017 | tmennink
We did this test, we opened the tape and turned it upside down, indeed some leds were staying inside the tape. We will try placing them next week with a fuji NXT line. We also contacted the manufacturer, apparently heat perhaps during transport coul
Electronics Forum | Thu Aug 03 20:51:27 EDT 2017 | OrHorti
I did a test where the leds were put into a 95% humidity at 60 degC environment for an hour, and after that almost all leds would stick into the carrier tape. So, moisture might certainly play a major role in the stickiness of the leds. We placed al
.gif)
