Electronics Forum: taped (Page 1 of 221)

tape and reel machine

Electronics Forum | Thu Oct 11 13:37:35 EDT 2001 | Stefan

The pressure sensitive tape is used as an alternative to heat sealed cover tape. It works usually quite well and is easily applied by the taping machine, but it can create some problems in the tape feeder. In the Surftape, Cal is referring to, the c

Re: Paper Or Plastic / PSA Or Heat Sealed

Electronics Forum | Wed Jun 07 09:06:06 EDT 2000 | Stefan Witte

Compared to paper tape, I find a higher defect rate on 0402 components in plastic tape even without the PSA tape. The plastic tape appears to be less shock absorbent and this may be the reason for feeding problems on small components. PSA tape has it

ESD kapton tape for SMT production use

Electronics Forum | Wed Jan 22 11:07:42 EST 2014 | leardkattiya

Understand that one..but the main issues is..do i really need to use ESD tape or non-ESD tape..since as we all know kapton tape is already expensive..if ESD kapton tape required in SMT line..the cost will be more higher.

Component tape

Electronics Forum | Fri Jan 15 09:55:58 EST 2016 | dyoungquist

Mycronic (Mydata) makes a solution for this. Product name is Tape Seal 8 or Tape Seal 1216 Tape Seal 8 - Part No: L-014-1600 Tape Seal 1216 - Part No: L-014-1572 I have used them and they work well.

Pls recommend the Kapton tape&Aluminium tape and Epoxy supplier

Electronics Forum | Tue Sep 14 08:15:07 EDT 2004 | davef

Alumininum tape suppliers can be found by searching the fine SMTnet Archives.

Tape Splicing Joint Sensor for Panasonic Sensors

Electronics Forum | Wed Sep 25 12:42:30 EDT 2013 | Chris

You have to make sure the tape is covering the holes, this is where the sensor reads the tape.

tape&reel system

Electronics Forum | Sat Jun 23 21:04:44 EDT 2001 | Stefan

If you want to tinker a bit with old machines, you could buy an inexpensive ( under $ 10,000 ) used Pick&Place machine and reverse the polarity on the tape feeding motor. If you don't heat seal the cover tape, but use pressure sensitive cover tape,

Re: Splicing tape for 8,12, and 16mm component tapes

Electronics Forum | Fri Jun 05 08:38:22 EDT 1998 | Eric Klaver

The Tesa company delivers Splice Tape for 8mm, 12mm and 16mm. Also special splice tape for 8mm paper tape and some splice tools as well. Siemens uses for large tape a 'staple' but might be patented and then cannot be used outside Siemens. (Staples

Re: Splicing tape for 8,12, and 16mm component tapes/How 'Bout Carrier Tapes?

Electronics Forum | Thu Jun 04 10:00:11 EDT 1998 | Dave F

| Looking for vendors of splicing tape for 8,12 and 16mm tape and reel. | Any net sources? If you can use carrier (cover) tapes go see "Igmar Grewar 16:04:32 5/28/98" on SMTNet. Dave F

cover tape tearing

Electronics Forum | Wed Jul 30 10:45:31 EDT 2008 | moimoi

change of carrier tape from monolayer to trilaminate material...we found out through experimentation that the these carrier tape material when combined with a similar cover tape type would react differently even at similar taping parameters. monolaye

  1 2 3 4 5 6 7 8 9 10 Next

taped searches for Companies, Equipment, Machines, Suppliers & Information

Sell Your Used SMT & Test Equipment

Software for SMT placement & AOI - Free Download.
Void Free Reflow Soldering

Training online, at your facility, or at one of our worldwide training centers"
Thermal Interface Material Dispensing

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
thru hole soldering and selective soldering needs

Easily dispense fine pitch components with ±25µm positioning accuracy.
Electronic Solutions R3

Thermal Transfer Materials.