Electronics Forum: tdk (Page 1 of 6)

TDK Axial/Radial Programming software

Electronics Forum | Tue Apr 13 10:55:01 EDT 2004 | mnguyen

Spoke with TDK and they told me Unicam or now called Technomatics I think makes a software to program the VC but you can also use dynapert to program the AC-7. Is that true? TDK told me they do not have any software to program the machines using soft

TDK Axial/Radial Programming software

Electronics Forum | Thu Apr 08 14:59:49 EDT 2004 | jbservices

We used a company who wrote some software for us to do off line programs and storage, we utilised the rs 232 port to do this ,but this company went bust. TDK supply an MFT system which is expensive, I acn make some equiries for you from a contact at

TDK AC-7 Axial Programming

Electronics Forum | Fri Apr 30 10:22:10 EDT 2004 | mnguyen

I am having a hard time looking for a programming software for a TDK AC-7 Axial. TDK makes a MFT-30 for their Radial machine but there is no programming software made for the Axial machine. I see in it's file that you can export and import Dynapert f

Sony TDK Placement Equipment

Electronics Forum | Thu Feb 22 12:31:20 EST 2001 | markkrmp

Has anybody out there had any experience in using the Sony/TDK Placement Equipment in a production environment? I would appreciate any feedback good or bad. User friendly, maintainability, reliability, maintenance, etc ..... Thanks

Available TDK Equipment

Electronics Forum | Tue Dec 09 11:16:27 EST 1997 | Barbara Stappart

I have a tremendous inventory of used TDK assembly equipment. Can configure several lines from this equipment, either through-hole or SMT, or combined.

Re: Available TDK Equipment

Electronics Forum | Wed Dec 31 22:25:18 EST 1997 | G. Joplin

I have a tremendous inventory of used TDK assembly equipment. Can configure several lines from this equipment, either through-hole or SMT, or combined. Please E-mail me a list of equipment, would be interested in new generation only rx11, ss2.

Support for VC-4H radial machines

Electronics Forum | Wed Aug 27 21:03:03 EDT 2003 | davef

What does TDK [ http://www.component.tdk.com/fa/factoryautomation.html ] say?

TDK RX11 Problem

Electronics Forum | Mon Dec 01 23:44:58 EST 2003 | masr

Any one know about TDK RX11 machines? I have a servo problem with the "C" axis (no encoder reader signal) I'll apreciate any one help! Tks!

TDK RX11 Machine

Electronics Forum | Mon Dec 01 23:48:37 EST 2003 | masr

Any one know about TDK RX11 machines? I have a servo problem with "C" axis. I'll apreciate any one help! Tks! M.S.

TDK RX11 Satellite Password

Electronics Forum | Wed Dec 10 11:31:56 EST 2003 | Steven Baker

We have a SMT TDK line with a satellite computer. We have been unable to use the Satellite because we don't have a password to get into the system. Does anyone know of a default password for this? Thanks

  1 2 3 4 5 6 Next

tdk searches for Companies, Equipment, Machines, Suppliers & Information